Do these 3 things before closing this tab:
1Fix the driver behind crashes, sound loss and screen glitches2Repair Windows errors before they cause bigger problems3Scan for outdated or missing drivers - takes under a minuteFor one local video, use OBS Media Source and turn on Loop. For a playlist of local files, use VLC Video and keep Loop Playlist enabled. VLC Video adds playlist and shuffle controls, but it requires VLC to be installed—and its architecture must match OBS. Either source supplies media to your OBS scene; YouTube receives the finished, encoded OBS feed through a separate stream URL and key.
Choose the OBS source that fits your video
| What you want to loop | Use | Loop setting | Main consideration |
|---|---|---|---|
| One local video file | Media Source | Loop (off by default) | Built into OBS; straightforward for a single file. |
| A playlist of local files | VLC Video | Loop Playlist (on by default) | Supports playlists and shuffle, but requires a compatible VLC installation. |
These recommendations concern playback inside OBS, not different ways of connecting to YouTube. OBS documents Media Source and VLC Video settings on its Media Sources page, dated January 11, 2022.
Loop one local video with Media Source
- Add the source: In the OBS Sources dock, select + and choose Media Source. Create a new source or select an existing one.
- Choose the file: In the source properties, select the local-file option and browse to the video. OBS lists formats including MP4, TS, MOV, FLV, MKV, AVI, GIF, and WebM; audio formats include MP3, AAC, OGG, and WAV.
- Enable repetition: Check Loop. It is off by default, so without it the file will not repeat through this setting.
- Review the other playback controls: Restart playback when source becomes active defaults on. Show nothing when playback ends also defaults on, while Close file when inactive defaults off. These settings are distinct from Loop: restart-on-active affects playback when the source becomes active; the end behavior affects what is shown after playback ends; and close-when-inactive governs the file when the source is inactive.
Loop a playlist with VLC Video
- Check the dependency first: Install VLC for VLC Video to appear as an OBS source. If you use 64-bit OBS, OBS requires 64-bit VLC.
- Add the source: In the Sources dock, select + and choose VLC Video.
- Build the playlist: Add the local media files in the order you want them played. VLC Video is the OBS source documented for playlist support.
- Set repeat and order: Leave Loop Playlist enabled to restart the playlist when it runs out of media; it is on by default. Enable Shuffle Playlist only if you want the items played in a shuffled order; shuffle is off by default.
- Choose behavior when hidden: Set the source’s visibility behavior to suit the production. By default, playback stops when the source is not visible and restarts when it becomes visible. VLC Video also has audio and subtitle track settings, and its documented network-caching value is 400 ms.
OBS documents VLC Video as similar to Media Source, with playlist support and VLC libraries for extended media support. The documented controls establish how the source is configured; they do not establish that editing a playlist during an active YouTube broadcast avoids a reset, gap, or interruption.
Understand “stop when not visible”
“Visible” refers to whether the source is shown in the OBS scene—not whether the OBS application window is on screen. In the Sources dock, the eye control shows or hides an individual source. VLC Video’s default stop-and-restart behavior applies when that source is hidden or otherwise not visible in the scene. If a scene change hides it, decide whether stopping and restarting fits the intended show behavior. See the OBS Sources Guide, dated January 11, 2022, for source visibility and scene behavior.
Windows Errors? Fix Them Before They Spread
Repair common Windows errors and clear accumulated junk for a smoother, more stable PC - no reinstall needed.Free scan · no reinstallOutdated Drivers Are Slowing You Down
One free scan finds every outdated or missing driver and matches the right update for your exact hardware.Free scan · exact hardware match#1 Best Overall
- Read Before You Buy — No Video Output: These adapters support charging and USB 2.0 data transfer, but cannot transmit video signals. Except for standard USB webcams (which use USB data only), they are not compatible with HDMI/DisplayPort cables, video-capable USB-C hubs, or docking stations with video output.
- Convert USB-A Ports to USB-C: Designed to connect USB-C earphones, cables, flash drives, card readers, and other USB-C accessories to standard USB-A ports. Plug-and-play with no drivers or software required.
- Aluminum Alloy Housing: Built with a sturdy aluminum alloy shell that aids in heat dissipation and protects against daily wear and scratches. Designed to maintain a stable and secure connection.
- Compact & Travel-Friendly: The ultra-compact design allows the adapter to stay plugged into your device without blocking adjacent ports or adding bulk, reducing wear and tear on your original USB ports.
- 12-Month Warranty: Backed by a 12-month manufacturer warranty for peace of mind. Designed to meet strict quality control standards for reliable everyday performance.
Connect OBS to YouTube separately
The media source plays the content that becomes part of the OBS production. The encoder connection sends that composed feed to YouTube. In OBS, configure YouTube’s stream URL and stream key in the streaming settings; the key is the credential information YouTube uses to accept the encoder feed, while the URL is the destination entered in the encoder. Neither setting controls whether a Media Source or VLC Video loops. YouTube explains these connection settings in Manage live stream settings (reviewed October 3, 2026; the page did not expose a publication date).
Check rights and playlist changes before relying on a long stream
Only stream video and audio you have the rights to use, and check YouTube’s applicable copyright and reused-content rules for your channel and material. The OBS source documentation describes playback controls, not whether particular content meets YouTube’s policies. It also does not establish that adding or editing playlist entries while live is interruption-free. If changes matter during a broadcast, make them before going live or verify the behavior in a controlled setup rather than assuming the playlist will change seamlessly.
Rank #2
- 5-in-1 USB-C Hub: Experience comprehensive connectivity featuring a Power Delivery input, two USB-A 2.0 ports, a USB-A 3.0 port, and an HDMI port. (Note: The USB-C power delivery input port is only for connecting an external wall charger to power your laptop and cannot power peripheral devices.)
- 90W Pass-Through Charging: Achieve optimal charging with 90W pass-through power to your laptop, supported by a total input of 100W, with the hub reserving 10W for operational efficiency. (Note: Wall charger not included.)
- Quick Data Transfers: Accelerate your productivity with rapid data transfers using a high-speed 5Gbps USB 3.0 port and two 480Mbps USB 2.0 ports.
- 4K HDMI Display: Enhance your visual experience with a hub capable of delivering 4K resolution at 30Hz in both mirror and extend modes. Please note that this hub is compatible with MacBook (macOS 12 and newer), Windows 10 and 11, ChromeOS, and laptops equipped with DP Alt Mode and Power Delivery. Note: This device is not compatible with Linux.
- What You Get: Anker USB-C Hub (5-in-1, 4K HDMI), welcome guide, 18-month warranty, and our friendly customer service.
Troubleshoot common setup problems
- The single video plays once and stops: Open Media Source properties and enable Loop; it is off by default.
- The playlist does not repeat: Open VLC Video properties and check Loop Playlist. This is on by default, so confirm it has not been changed.
- VLC Video is missing from the source menu: Install VLC. For 64-bit OBS, use 64-bit VLC.
- Playback stops after a scene change: Check whether the source became hidden and review VLC Video’s visibility behavior. The documented default is to stop when hidden and restart when visible.
- The source is configured, but YouTube is not receiving the stream: Check the encoder destination URL and stream key separately from the media-source settings.
- A live playlist edit causes an unexpected change: OBS’s documentation does not promise gap-free live edits. Prepare the playlist in advance or test the exact change outside a critical broadcast.
Or let it run in the cloud
If your goal is a 24/7 YouTube stream of uploaded videos, StreamNeo is the cloud alternative: upload a recording or build a playlist, add your YouTube stream key once, and go live. Nothing has to stay on at home; it loops uploaded videos rather than broadcasting from a camera. Any quality up to 4K 60fps streams as uploaded at one flat price per slot, with automatic recovery if YouTube drops the stream. The first day is free with no card. Monthly: $9.99 per month. See StreamNeo or start the free first day.
Quick Recap
Best Value
- 5-in-1 Connectivity: Equipped with a 4K HDMI port, a 5 Gbps USB-C data port, two 5 Gbps USB-A ports, and a USB C 100W PD-IN port. Note: The USB C 100W PD-IN port supports only charging and does not support data transfer devices such as headphones or speakers.
- Powerful Pass-Through Charging: Supports up to 85W pass-through charging so you can power up your laptop while you use the hub. Note: Pass-through charging requires a charger (not included). Note: To achieve full power for iPad, we recommend using a 45W wall charger.
- Transfer Files in Seconds: Move files to and from your laptop at speeds of up to 5 Gbps via the USB-C and USB-A data ports. Note: The USB C 5Gbps Data port does not support video output.
- HD Display: Connect to the HDMI port to stream or mirror content to an external monitor in resolutions of up to 4K@30Hz. Note: The USB-C ports do not support video output.
- What You Get: Anker 332 USB-C Hub (5-in-1), welcome guide, our worry-free 18-month warranty, and friendly customer service.
Rank #4
- Dual Converters, Infinite Potential：Includes 2× USB C male to USB A female adapters and 2× USB A male to USB C female adapters. Perfect for a wide range of uses—tablets with Bluetooth keyboards, expand USB ports on macbook, and more. Two different converters for all your daily needs
- Next-Level 10Gbps & 3A Charging: No more slow 480Mbps, this usb to usb c adapter has a transfer speed of up to 10Gbps, allowing you to do more transferring in less time. This usb adapter fits both USB A and USB C charger, supporting up to 3A fast charging
- Upgraded Exquisite Craftsmanship: With an aluminum alloy housing and metal connector, the usbc to usb adapter is extremely durable and sturdy. Rigorously tested to withstand more than 10,000 times of plugging and unplugging, ensuring long-lasting performance
- Broad Compatible: The usb c to usb adapter widely supports all USB C/ USB A devices like laptops, tablets, cellphones, car chargers, and phone chargers. Such as compatible with MacBook Pro/Air 2023/2022, Thunderbolt 4/3 Devices,Apple MagSafe Watch 9/8/7/SE/Ultra, iPad Pro 2022/2021, Samsung Galaxy S23/S20/S10, and iPhone 17/16/15 Pro. Plug and play
- Please Note: To reach 10Gbps speed, keep the cable under 3.3 ft. For USB A Male to USB C adapters, try flipping the USB C connector. USB C Male to USB A adapters support bidirectional 10Gbps transfer within 3.3 ft
Rank #3
- Sleek 7-in-1 USB-C Hub: Features an HDMI port, two USB-A 3.0 ports, and a USB-C data port, each providing 5Gbps transfer speeds. It also includes a USB-C PD input port for charging up to 100W and dual SD and TF card slots, all in a compact design.
- Flawless 4K@60Hz Video with HDMI: Delivers exceptional clarity and smoothness with its 4K@60Hz HDMI port, making it ideal for high-definition presentations and entertainment. (Note: Only the HDMI port supports video projection; the USB-C port is for data transfer only.)
- Double Up on Efficiency: The two USB-A 3.0 ports and a USB-C port support a fast 5Gbps data rate, significantly boosting your transfer speeds and improving productivity.
- Fast and Reliable 85W Charging: Offers high-capacity, speedy charging for laptops up to 85W, so you spend less time tethered to an outlet and more time being productive.
- What You Get: Anker USB-C Hub (7-in-1), welcome guide, 18-month warranty, and our friendly customer service.
Product prices and availability are accurate as of the date/time indicated and are subject to change. Any price and availability information displayed on Amazon at the time of purchase will apply.
