If your LiveReacting broadcast still says “upcoming,” first check whether the scheduled YouTube event is actually due to start. An upcoming label before the scheduled time can be normal. If the start time has passed, verify the event and time zone, then confirm that LiveReacting—or your external encoder—is sending to that exact event. There is no single cause established for every case; the right diagnosis depends on your project and YouTube Live Control Room.
First, determine whether “upcoming” is expected
Check both the YouTube watch page and YouTube Studio’s Live Control Room. YouTube says a stream scheduled for later may appear in subscribers’ feeds as upcoming. If the event’s scheduled start time has not arrived, that status alone does not show that anything is broken.
If the scheduled time has passed and the event still appears upcoming, work through the checks below in order. Avoid changing several settings at once: confirming the event and its destination first can distinguish a scheduling mismatch from a feed or visibility issue.
Check the scheduled event and its time
- Find the intended event in YouTube Studio. Confirm that it exists and that you are checking the right broadcast, rather than another scheduled event on the channel.
- Compare the scheduled time with the device time zone. LiveReacting says its scheduling uses the time zone of the device used to schedule the stream. Check that zone against the time shown for the YouTube event; a time-zone mismatch can make the event appear not to have started when expected.
- Check how far ahead it was scheduled. LiveReacting documents scheduling YouTube videos up to two weeks in advance. If the intended event is outside that window, verify the schedule in YouTube Studio and use an available scheduling workflow.
Make sure LiveReacting selected the same YouTube event
If you created the event in YouTube separately, LiveReacting needs to be connected to the channel and pointed at that existing event. In the LiveReacting project:
The Tool Desk
Outbyte Driver Updater FREEFix the driver behind crashes, sound loss and screen glitchesFind Drivers →Outbyte PC Repair FREEClear out junk files and repair common Windows errorsFree Scan →#1 Best Overall
- Read Before You Buy — No Video Output: These adapters support charging and USB 2.0 data transfer, but cannot transmit video signals. Except for standard USB webcams (which use USB data only), they are not compatible with HDMI/DisplayPort cables, video-capable USB-C hubs, or docking stations with video output.
- Convert USB-A Ports to USB-C: Designed to connect USB-C earphones, cables, flash drives, card readers, and other USB-C accessories to standard USB-A ports. Plug-and-play with no drivers or software required.
- Aluminum Alloy Housing: Built with a sturdy aluminum alloy shell that aids in heat dissipation and protects against daily wear and scratches. Designed to maintain a stable and secure connection.
- Compact & Travel-Friendly: The ultra-compact design allows the adapter to stay plugged into your device without blocking adjacent ports or adding bulk, reducing wear and tear on your original USB ports.
- 12-Month Warranty: Backed by a 12-month manufacturer warranty for peace of mind. Designed to meet strict quality control standards for reliable everyday performance.
- Open Settings and connect the relevant YouTube channel.
- Open Advanced Settings.
- Enable Connect to existing stream.
- Choose the intended scheduled event from the dropdown.
When an existing event is selected this way, LiveReacting says it pulls the event’s title and description from the channel. Check the selected event carefully; selecting a different event will not send the project to the one you intended.
If an external encoder is sending the feed, check its destination and key
If you use an external encoder, such as OBS, verify that it is sending to the intended scheduled event using the corresponding YouTube stream key. YouTube describes the stream key as credential and destination information used by the encoder to send the feed. A correctly configured existing key does not need to be reset as a first troubleshooting step.
Rank #2
- 5-in-1 USB-C Hub: Experience comprehensive connectivity featuring a Power Delivery input, two USB-A 2.0 ports, a USB-A 3.0 port, and an HDMI port. (Note: The USB-C power delivery input port is only for connecting an external wall charger to power your laptop and cannot power peripheral devices.)
- 90W Pass-Through Charging: Achieve optimal charging with 90W pass-through power to your laptop, supported by a total input of 100W, with the hub reserving 10W for operational efficiency. (Note: Wall charger not included.)
- Quick Data Transfers: Accelerate your productivity with rapid data transfers using a high-speed 5Gbps USB 3.0 port and two 480Mbps USB 2.0 ports.
- 4K HDMI Display: Enhance your visual experience with a hub capable of delivering 4K resolution at 30Hz in both mirror and extend modes. Please note that this hub is compatible with MacBook (macOS 12 and newer), Windows 10 and 11, ChromeOS, and laptops equipped with DP Alt Mode and Power Delivery. Note: This device is not compatible with Linux.
- What You Get: Anker USB-C Hub (5-in-1, 4K HDMI), welcome guide, 18-month warranty, and our friendly customer service.
- In YouTube Studio’s Live Control Room, open the intended event and check whether YouTube shows an incoming feed.
- Compare the event selected in LiveReacting or the encoder with the event you are inspecting in Studio.
- Confirm that the encoder is using the stream key associated with that destination.
- If a channel owner or manager resets the key in YouTube Studio, update the encoder with the newly generated key. The old key will not become the new one automatically.
Never post or send a stream key publicly. Treat it as a credential for your broadcast destination.
Check privacy without treating it as the assumed cause
YouTube offers public, private, and unlisted privacy settings. A private preview may be visible only to the creator, according to LiveReacting’s preview guidance. LiveReacting also warns that interactive elements require the stream to be public.
PC Slower Than It Used to Be?
A free scan shows the junk files, broken settings and background clutter dragging Windows down - then fixes them in one click.Free scan · Windows 10 & 11Crashes, No Sound, or Screen Glitches?
Random freezes, missing sound and display glitches usually trace back to one bad driver. Find and replace yours safely.Free scan · under a minuteRank #3
- Sleek 7-in-1 USB-C Hub: Features an HDMI port, two USB-A 3.0 ports, and a USB-C data port, each providing 5Gbps transfer speeds. It also includes a USB-C PD input port for charging up to 100W and dual SD and TF card slots, all in a compact design.
- Flawless 4K@60Hz Video with HDMI: Delivers exceptional clarity and smoothness with its 4K@60Hz HDMI port, making it ideal for high-definition presentations and entertainment. (Note: Only the HDMI port supports video projection; the USB-C port is for data transfer only.)
- Double Up on Efficiency: The two USB-A 3.0 ports and a USB-C port support a fast 5Gbps data rate, significantly boosting your transfer speeds and improving productivity.
- Fast and Reliable 85W Charging: Offers high-capacity, speedy charging for laptops up to 85W, so you spend less time tethered to an outlet and more time being productive.
- What You Get: Anker USB-C Hub (7-in-1), welcome guide, 18-month warranty, and our friendly customer service.
Check the event’s privacy setting if the issue is that viewers cannot see it. However, the available documentation does not establish privacy as a cause of an event remaining “upcoming,” so changing privacy is not a guaranteed fix for that status.
Choose the right operating path
| Path | Where the feed starts | Where to verify the destination | Where to check the stream key |
|---|---|---|---|
| LiveReacting project | In the LiveReacting workflow. | In the project’s Advanced Settings, with Connect to existing stream enabled if using an event created separately in YouTube. | Check the YouTube connection and destination selected for the project. |
| Plugin Mode | In the third-party streaming software used with LiveReacting. LiveReacting lists OBS, Wirecast, StreamYard, and Ecamm as plugin-mode options. | Check the event selected for the workflow and the destination shown in YouTube Studio. | Check the encoder’s configured key and replace it there if it was reset in YouTube Studio. |
Plugin Mode is an alternative workflow, not a documented repair that by itself changes an existing event from upcoming to live. Switch modes only if that matches how you intend to operate the stream; changing modes does not replace checking the scheduled event and feed destination.
Rank #4
- Dual Converters, Infinite Potential：Includes 2× USB C male to USB A female adapters and 2× USB A male to USB C female adapters. Perfect for a wide range of uses—tablets with Bluetooth keyboards, expand USB ports on macbook, and more. Two different converters for all your daily needs
- Next-Level 10Gbps & 3A Charging: No more slow 480Mbps, this usb to usb c adapter has a transfer speed of up to 10Gbps, allowing you to do more transferring in less time. This usb adapter fits both USB A and USB C charger, supporting up to 3A fast charging
- Upgraded Exquisite Craftsmanship: With an aluminum alloy housing and metal connector, the usbc to usb adapter is extremely durable and sturdy. Rigorously tested to withstand more than 10,000 times of plugging and unplugging, ensuring long-lasting performance
- Broad Compatible: The usb c to usb adapter widely supports all USB C/ USB A devices like laptops, tablets, cellphones, car chargers, and phone chargers. Such as compatible with MacBook Pro/Air 2023/2022, Thunderbolt 4/3 Devices,Apple MagSafe Watch 9/8/7/SE/Ultra, iPad Pro 2022/2021, Samsung Galaxy S23/S20/S10, and iPhone 17/16/15 Pro. Plug and play
- Please Note: To reach 10Gbps speed, keep the cable under 3.3 ft. For USB A Male to USB C adapters, try flipping the USB C connector. USB C Male to USB A adapters support bidirectional 10Gbps transfer within 3.3 ft
If it is still upcoming, collect the details support needs
Public documentation cannot inspect your LiveReacting project, selected destination, encoder feed, or the state shown in your Live Control Room. If the checks do not resolve the problem, record the following before contacting the relevant support channel:
- The event URL and its scheduled start time, including the time zone.
- The YouTube event selected in the LiveReacting project, if applicable.
- Whether you are using the LiveReacting workflow or Plugin Mode, and which encoder is involved.
- Whether YouTube Studio shows an incoming feed for the intended event.
Do not include the stream key in a public post or support message unless you are using a secure channel that specifically requires it.
Best Value
- 5-in-1 Connectivity: Equipped with a 4K HDMI port, a 5 Gbps USB-C data port, two 5 Gbps USB-A ports, and a USB C 100W PD-IN port. Note: The USB C 100W PD-IN port supports only charging and does not support data transfer devices such as headphones or speakers.
- Powerful Pass-Through Charging: Supports up to 85W pass-through charging so you can power up your laptop while you use the hub. Note: Pass-through charging requires a charger (not included). Note: To achieve full power for iPad, we recommend using a 45W wall charger.
- Transfer Files in Seconds: Move files to and from your laptop at speeds of up to 5 Gbps via the USB-C and USB-A data ports. Note: The USB C 5Gbps Data port does not support video output.
- HD Display: Connect to the HDMI port to stream or mirror content to an external monitor in resolutions of up to 4K@30Hz. Note: The USB-C ports do not support video output.
- What You Get: Anker 332 USB-C Hub (5-in-1), welcome guide, our worry-free 18-month warranty, and friendly customer service.
Or let it run in the cloud
If your goal is to keep uploaded videos looping as a 24/7 YouTube stream rather than troubleshoot this particular scheduled event, StreamNeo is a separate cloud option: upload a recording or build a playlist, add your YouTube stream key once, and go live. Nothing has to stay running at home; it streams your upload at its original quality up to 4K 60fps for one flat price per slot, with automatic recovery if YouTube drops the stream. The first day is free with no card. Monthly: $9.99 per month. It plays uploaded videos to YouTube; it is not a camera-based live broadcast. Start your free day with StreamNeo.
Quick Recap
Product prices and availability are accurate as of the date/time indicated and are subject to change. Any price and availability information displayed on Amazon at the time of purchase will apply.
