To play prerecorded lectures in sequence as one continuous YouTube Live broadcast, use OBS Studio’s VLC Video source: add the lecture files in order, enable Loop Playlist if they should start over after the final lecture, then send OBS to a YouTube Live event using its stream URL and key. This is an encoder playlist, not a YouTube watch-page playlist. The same global YouTube setup applies in India; the cited guidance does not identify a separate India-only workflow.
What “continuous YouTube Live playlist” means
OBS plays local lecture recordings and sends the resulting picture and sound to YouTube as one live feed. Viewers watch a live event; they are not watching a YouTube playlist page that automatically becomes a live broadcast. YouTube also uses “playlist” in its HLS documentation for transport segments, which is a different technical meaning and not the collection of lectures you are preparing.
This workflow is for files accessible to the computer running OBS. The documented VLC Video source does not establish a way to stream videos hosted only on YouTube, nor does it automatically change scene layouts for each lecture.
Check eligibility and permissions first
Confirm the channel can go live
YouTube’s global eligibility guidance says the channel must be verified and must not have had live-streaming restrictions in the previous 90 days. First-time live-stream activation can take up to 24 hours, so enable it well before the intended session. YouTube also says streamers must be at least 16 years old. See YouTube’s live-streaming eligibility guidance and encoder setup guide.
Do these 3 things before closing this tab:
1Repair Windows errors before they cause bigger problems2Fix the driver behind crashes, sound loss and screen glitches3Clear out junk files and repair common Windows errors#1 Best Overall
- [Natural Audio Clarity] Operated with frequency response of 50Hz-16KHz, the podcasting XLR mic delivers balanced audio range, likely to resonate with your audience. Directional cardioid dynamic microphone corded will not exaggerate your voice, while rejects unwanted off-axis noise for vocal originality and intelligibility during your PS5 gaming streaming video recording. (Tips: Keep the top of end-addressing XLR dynamic microphone AM8 facing audio source, and suggested recording range is 2 to 6 in.)
- [XLR Connection Upgrade-Ability] To use XLR connection, connect the podcast microphone to an audio interface (or mixer) using a separate XLR cable (NOT Included) . Well-connected and smooth operation improves audio flexibility to make you explore various types of music recording singing. The streaming mic isolates the pristine and accurate sound from ambient noise with greater no interference and fidelity. (RGB and function key on mic are INACTIVE when using XLR connection.)
- [USB Connection with Handy Mute] Skip the hassle of setting something up and plug the cable to play the dynamic USB microphone directly, which suits for beginner creators or daily podcast. You can quickly control the gamer mic with tap-to-mute that is independent of computer/Macbook programs to keep privacy when live streaming. LED mute reminder helps you get rid of forgetting to cancel the mute. (RGB and function key are only available for USB connection, but NOT for XLR connection)
- [Soothing Controllable RGB] RGB ring on the desktop gaming microphone for PC, with 3 modes and more than 10 light colors collection, matches your PC gears accessories for gaming synergy even in dim room. You can control the RGB key button of the dynamic microphone USB directly for game color scheme gaming or live streaming. Configured memory function, the streaming microphone RGB no need to repeated selections after turnning off and brings itself alive when power on. (Only available for USB connection)
- [More Function Keys] Computer microphone with headphones jack upgrades your rhythm game experience and gets feedback whether the real-time voice your audience hear as expected. Get the desired level via monitoring volume control when gaming recording. Smooth mic gain knob on the PC microphone gaming has some resistance to the point, easily for audio attenuation or boost presence to less post-production audio. (Only available for USB connection)
Clear rights for the complete recording
Make sure you have permission to broadcast each lecture and all embedded material, including slides, photographs, music, film clips, and guest contributions. YouTube says, “All live streams are scanned for matches to third-party content, including copyrighted content in the form of another live broadcast.” A match may interrupt or terminate a stream. Even when you have a licence, a rights holder may need to allowlist your channel for Content ID. Review YouTube’s guidance on copyright issues with live streams and YouTube’s Terms of Service. Institutions and educators in India should also confirm that their permissions comply with applicable laws and territorial limits.
Prepare the lecture files and OBS playlist
- Install VLC. OBS’s VLC Video source requires VLC to be installed. Match the architecture: 64-bit OBS requires 64-bit VLC. Install or update both before building the scene.
- Arrange the files. Put the recordings in the intended course order and ensure the streaming computer can access them for the full broadcast. Keep the files in a stable location rather than moving them after setup.
- Add the playlist source. In OBS, add a VLC Video source to the scene and add the lecture files to its media list. Arrange them in order. Leave shuffle off when students should see the lectures sequentially.
- Choose whether to repeat. Enable Loop Playlist if playback should restart with the first lecture after the last. OBS documentation indicates this control defaults to On; verify the setting instead of relying on the default. If the series should finish rather than restart, turn it off.
- Check the scene and sound. Set the OBS canvas and output to suit the recordings, confirm that the video fits the frame, and listen for clear audio at a sensible level. Play through the source and check how file changes look and sound. Differently encoded recordings may not transition seamlessly; test the actual sequence rather than assuming they will.
The VLC Video source handles a playlist of multiple files. OBS’s standard Media Source is for one local file and has its own single-file loop control; it is not a substitute when you need an ordered multi-lecture list.
Rank #2
- [Convenient Setup] Plug and play recording USB microphone for PC, with 5.9-Foot USB cable included for computer PC laptop, is connected directly to USB-A port for recording music, computer singing or podcast. The office condenser microphone for computer is easy to use and install. (NOT compatible with Xbox and Phones)
- [Durable Metal Design] Solid sturdy metal construction design, the computer microphone for Zoom meetings with stable tripod stand is convenient when you are doing voice overs or livestreams on YouTube. Durable material extends the service life of the voice-over microphone.
- [Mic Volume Knob] Gaming condenser USB mic compatible for PS4 with additional volume knob itself has a louder or quieter adjustment and is more sensitive. Your voice would be heard well enough through the zoom microphone USB when gaming, skyping or voice recording. Also, you can adjust your volume to zero and protect your privacy.
- [Widely Use] USB-powered design, the condenser microphone for recording no need the 48v Phantom power supply, works well with Cortana, Discord, voice chat and voice recognition. The podcast microphone for Mac, with USB-B to USB-A/C cable, is compatible with desktop, laptop or PS4/PS5, which meets most of your daily recording needs.
- [Clear Output Voice] Cardioid condenser microphone for PC captures your voice properly, producing clear smooth and crisp sound. Great computer recording mic for gamers/streamers/youtubers focus on the main source and reduces background noise. The streaming microphone does the job well for broadcast ,OBS and teamspeak.
Create the YouTube event and connect OBS
- Open YouTube Studio’s Live Control Room. Create a new live event or choose an existing stream. Scheduling is optional, but it gives viewers a watch page and a chance to set a reminder.
- Copy the encoder details. Get the stream URL and stream key for that event, then enter them in OBS’s streaming settings. Treat the key like a password: do not show it on screen or share it. YouTube’s scheduling guidance and encoder guide explain the event and connection steps.
- Start OBS and inspect the preview. Start the encoder early enough to check that Live Control Room receives the expected video and audio. Confirm that the event’s visibility is set to public, unlisted, or private as intended.
- Check the viewer experience. Open the watch page on a phone or another device, verify playback and sound, then monitor Live Control Room’s stream health during the broadcast. If you also make a local recording, check that it is recording to a drive with enough free space.
For ordinary local lecture playlists, use the conventional encoder workflow above rather than YouTube’s HLS ingestion instructions. HLS is a distinct protocol choice with codec and segment constraints; YouTube notes that “HLS has higher latency because it sends segments of video, instead of a continuous stream like RTMP.” Use it only if your encoder specifically supports and requires those HLS capabilities. See YouTube’s HLS setup guide.
Plan for a long broadcast and possible interruptions
- Keep the local setup running. The computer must remain powered on, OBS must keep running, and the internet connection must remain available. YouTube recommends reliable connectivity, sufficient outbound upload capacity with headroom, advance setup, testing, and monitoring. Its documentation does not promise uninterrupted operation or a particular uptime.
- Have a recovery plan. Decide who will notice a stopped encoder or connection drop and how they will restart the broadcast. Test the computer, power, and network arrangement for the intended duration; do not assume a local setup will recover automatically.
- Understand the archive limit. YouTube says streams under 12 hours are automatically archived. Do not count on a longer continuous broadcast being archived in full; make a separate recording if you need a dependable copy of the complete lecture run. Details are in the encoder guide.
Troubleshooting the playlist before and during the stream
| What you see | Likely cause | What to do |
|---|---|---|
| VLC Video is missing or will not load | VLC is not installed, or its architecture does not match OBS. | Install VLC and ensure 64-bit OBS is paired with 64-bit VLC. Reopen OBS and test the source. |
| The wrong lecture plays or the sequence is shuffled | The source list is out of order or shuffle is enabled. | Reorder the media list and turn shuffle off, then test from the first item. |
| The playlist ends instead of starting over | Loop Playlist is off. | Enable Loop Playlist and verify the behavior by testing through the end of the list. |
| YouTube does not receive the OBS feed | The encoder is not started, or the URL/key was entered incorrectly or belongs to a different event. | Compare OBS’s encoder details with the selected event in Live Control Room. Keep the key private, and replace it if it may have been exposed. |
| Viewers report buffering or the stream health is poor | The network may lack stable outbound capacity or headroom. | Test the connection in advance, reduce competing network traffic, and monitor stream health. YouTube’s live-streaming tips cover preparation and connectivity. |
| The live broadcast is interrupted after a copyright match | A lecture asset or embedded third-party material may be detected, or a licensed channel may not be allowlisted. | Review the matched material and your permissions; arrange any required allowlisting with the rights holder before retrying. |
Or let it run in the cloud
If keeping a streaming computer and home connection available for the whole lecture run is impractical, StreamNeo is a cloud service for keeping a YouTube channel live from uploaded videos. Upload your recording or build a playlist, add your YouTube stream key once, and go live. The cloud plays the uploaded videos, so nothing has to stay on at home. It is YouTube-only and plays uploaded videos, not a camera feed.
What’s actually slowing this PC down?
Pick the symptom - the matching free tool is one click away.
Rank #3
- Custom three-capsule array: This professional USB mic produces clear, powerful, broadcast-quality sound for YouTube videos, Twitch game streaming, podcasting, Zoom meetings, music recording and more
- Blue VO!CE software: Elevate your streamings and recordings with clear broadcast vocal sound and entertain your audience with enhanced effects, advanced modulation and HD audio samples
- Four pickup patterns: Flexible cardioid, omni, bidirectional, and stereo pickup patterns allow you to record in ways that would normally require multiple mics, for vocals, instruments and podcasts
- Onboard audio controls: Headphone volume, pattern selection, instant mute, and mic gain put you in charge of every level of the audio recording and streaming process
- Positionable design: Pivot the mic in relation to the sound source to optimize your sound quality thanks to the adjustable desktop stand and track your voice in real time with no-latency monitoring
- One flat price per slot for any uploaded quality up to 4K 60fps, with no re-encode or quality tiers.
- Automatic recovery if YouTube drops the stream.
- The first day is free, with no card required (one free day per account).
- Every slot includes one always-on stream, 10 GB storage per slot pooled across active slots, 24/7 looping and playlists, and support from the StreamNeo team. The same features are included on every plan; only the billing length changes.
Monthly: $9.99 per month. UPI and cards are available in India; card checkout is available worldwide. Other billing periods are available for a day, a week, 6 months, or a year, and you can cancel any time. For 5 or more slots, contact support. Start the free day at StreamNeo registration.
Quick Recap
Best Value
- 【Crystal Clear Audio Quality】Our Omnidirectional pattern condenser microphone accurately captures your voice, making it perfect for dictation, online classrooms, and more.
- 【Active Noise-Cancelling】Come in CMTECK CCS2.0 SMART CHIP with Omnidirectional Polar Pattern, which can effectively block the background noise. The pop filter prevents plosives from overloading the microphone, ensuring only your voice is heard.7
- 【Convenient Mute Button with LED Indicator】You can quickly mute/un-mute the microphone with the Mute Button and the built-in LED light lets you know the working status(Greenlight: Connected; Red light: Mute mode).
- 【Easy to use】 No drivers needed, just plug and record without external power supply, directly connect the microphone to a USB compatible device, well compatible with Windows(7, 8 and 10), Mac OS and PS4 (NOT compatible with Raspberry Pi/Linux/Android）
- 【Mini size with Adjustable Gooseneck】Adopted flexible and adjustable gooseneck metal pipe, easily adjust position 360 degrees to suit user comfort. The compact and stable base maximizes your desktop space.
Rank #4
- 360 Degree Position Adjustable Gooseneck Design --Plug and play USB microphone Pick up the sound from 360-degree with high sensitivity, in the best possible location for sound to your PC gaming, dragon voice dictation, and talk to Cortana
- Mute Button & LED Indicator --One-click to mute/unmute your microphone for pc, Build-in LED indicator tells you the working status at any time
- Intelligent Noise-Canceling Tech --Premium omnidirectional condenser microphone with noise-canceling technology can pick up your clear voice and reduce background noise and echo
- USB Plug&Play(1.8/6ft USB Cable) -- No driver required. Just need to plug & play for the microphone to start recording, well compatible with Windows(7, 8, 10 and 11) and macOS. (NOT compatible with Xbox/Raspberry Pi/Android)
- Solid Construction--Adopting premium metal pipe and heavy-duty ABS stand to make sure that you will be satisfied with our computer mic quality
Product prices and availability are accurate as of the date/time indicated and are subject to change. Any price and availability information displayed on Amazon at the time of purchase will apply.
