What’s actually slowing this PC down?
Pick the symptom - the matching free tool is one click away.
To loop Assamese Christian sermon recordings in a YouTube Live broadcast, put the files in a looping source in OBS, then send OBS’s live output to YouTube using the stream URL and key from YouTube Studio. YouTube’s Loop control repeats playback for a viewer; it does not make a live broadcast cycle through your recordings.
What you need before setting up the loop
- A YouTube channel that is currently able to go live. YouTube says first-time live activation can take up to 24 hours.
- The sermon video files saved locally and arranged in the order you want them played.
- OBS Studio. For a playlist of multiple files, install VLC as well; OBS documents that 64-bit OBS requires 64-bit VLC for its VLC Video source.
- Permission to stream and rebroadcast each sermon recording, including any music, images, or other material embedded in it. The software setup does not establish that you have those rights.
Interface labels and available options can change, so check the current OBS installation and YouTube Studio interface as you follow the steps.
Set up one sermon or a playlist in OBS
For one recording
- Open OBS and select the scene you intend to broadcast.
- In the Sources panel, add a Media Source and select the sermon video file.
- In the Media Source properties, enable Loop. This repeats that file when playback reaches the end.
- Check the scene’s picture and audio. Confirm the video fits the canvas and that speech is audible without clipping.
For multiple recordings
- Install VLC if it is not already installed. If you use 64-bit OBS, use 64-bit VLC.
- In your OBS scene, add a VLC Video source.
- Add the sermon files to the source playlist in the order you want them to play.
- Enable Loop Playlist. Leave Shuffle Playlist off if the sermons should remain in the listed order; OBS documents shuffle as a separate setting, defaulting to Off.
- Preview the transitions between recordings, listening for abrupt volume changes, silence, or audio that gets cut off at a file boundary.
For the official OBS source options and properties, see OBS Project’s Media Sources documentation.
Connect OBS to YouTube Live
- In YouTube Studio, open the Live Control Room and create or select a stream.
- Copy the stream URL and stream key shown for that stream.
- In OBS, open the streaming settings and enter the YouTube stream URL and key. Treat the key like a password: anyone with it may be able to send video to your stream.
- Start streaming from OBS, then check the Live Control Room preview and complete YouTube’s Go live step if it is required for the selected stream setup.
YouTube’s setup guidance is at Create a YouTube live stream with an encoder.
#1 Best Overall
- Read Before You Buy — No Video Output: These adapters support charging and USB 2.0 data transfer, but cannot transmit video signals. Except for standard USB webcams (which use USB data only), they are not compatible with HDMI/DisplayPort cables, video-capable USB-C hubs, or docking stations with video output.
- Convert USB-A Ports to USB-C: Designed to connect USB-C earphones, cables, flash drives, card readers, and other USB-C accessories to standard USB-A ports. Plug-and-play with no drivers or software required.
- Aluminum Alloy Housing: Built with a sturdy aluminum alloy shell that aids in heat dissipation and protects against daily wear and scratches. Designed to maintain a stable and secure connection.
- Compact & Travel-Friendly: The ultra-compact design allows the adapter to stay plugged into your device without blocking adjacent ports or adding bulk, reducing wear and tear on your original USB ports.
- 12-Month Warranty: Backed by a 12-month manufacturer warranty for peace of mind. Designed to meet strict quality control standards for reliable everyday performance.
Choose output settings and rehearse
Use YouTube’s current encoder guidance when choosing output settings. YouTube currently documents RTMP/RTMPS delivery, H.264, H.265/HEVC, and AV1 video codecs, and AAC or MP3 audio for RTMP/RTMPS. It recommends constant bitrate encoding and a two-second keyframe interval, not exceeding four seconds. Match resolution and bitrate to the available upload connection; run a speed test and do not assume the connection can sustain a setting just because OBS accepts it. These are YouTube’s platform recommendations, not a tested configuration for a particular sermon stream.
- YouTube recommends RTMPS, the encrypted extension of RTMP.
- Preview representative sermon footage and listen to actual speech and music, not just a silent desktop or opening frame.
- Check that the watch page is accessible to the intended audience and watch the stream health indicators during the rehearsal.
- YouTube’s DVR feature allows viewers to pause and rewind, then resume where they paused. Decide whether that behavior suits your audience.
See YouTube’s live encoder settings, bitrates, and resolutions for current platform guidance.
Rank #2
- 5-in-1 USB-C Hub: Experience comprehensive connectivity featuring a Power Delivery input, two USB-A 2.0 ports, a USB-A 3.0 port, and an HDMI port. (Note: The USB-C power delivery input port is only for connecting an external wall charger to power your laptop and cannot power peripheral devices.)
- 90W Pass-Through Charging: Achieve optimal charging with 90W pass-through power to your laptop, supported by a total input of 100W, with the hub reserving 10W for operational efficiency. (Note: Wall charger not included.)
- Quick Data Transfers: Accelerate your productivity with rapid data transfers using a high-speed 5Gbps USB 3.0 port and two 480Mbps USB 2.0 ports.
- 4K HDMI Display: Enhance your visual experience with a hub capable of delivering 4K resolution at 30Hz in both mirror and extend modes. Please note that this hub is compatible with MacBook (macOS 12 and newer), Windows 10 and 11, ChromeOS, and laptops equipped with DP Alt Mode and Power Delivery. Note: This device is not compatible with Linux.
- What You Get: Anker USB-C Hub (5-in-1, 4K HDMI), welcome guide, 18-month warranty, and our friendly customer service.
Plan for the YouTube archive
YouTube says streams under 12 hours are automatically archived. Streams over 12 hours may not be captured, so keep a local recording if an archive matters. Decide beforehand whether the resulting archive should be public, unlisted, or private. See YouTube’s guidance on archiving live streams.
Common problems and fixes
- The sermon plays once and stops: For a single file, check that Loop is enabled on the Media Source. For multiple files, check Loop Playlist on the VLC Video source.
- VLC Video is missing from OBS: Install VLC and make sure its architecture matches OBS. OBS documents the 64-bit OBS and 64-bit VLC requirement.
- Files play in the wrong order: Check the playlist order and make sure Shuffle Playlist is off.
- YouTube does not receive the OBS feed: Recheck the stream URL and key in OBS against the selected stream in Live Control Room. Confirm OBS has started streaming and inspect the YouTube preview.
- The stream drops or reports poor health: Check the upload connection and reduce output demands to settings it can sustain. Rehearse with the intended resolution and bitrate before relying on the broadcast.
- Speech is too quiet, distorted, or interrupted between sermons: Check OBS audio levels and listen through the transitions using the actual playlist files.
Or let it run in the cloud
If you do not want a computer and home connection running throughout the broadcast, StreamNeo keeps an uploaded-video stream live on YouTube from the cloud. Upload the sermon recording or build a playlist, add your YouTube stream key once, and go live. Nothing has to stay on at home; your files stream as uploaded at any quality up to 4K 60fps for one flat price per slot, with automatic recovery if YouTube drops the stream. The first day is free with no card. Monthly: $9.99 per month. UPI and cards are supported in India; card checkout is available worldwide. Start your free day with StreamNeo.
Do these 3 things before closing this tab:
1Scan for outdated or missing drivers - takes under a minute2Repair Windows errors before they cause bigger problems3Fix the driver behind crashes, sound loss and screen glitchesQuick Recap
Best Value
- 5-in-1 Connectivity: Equipped with a 4K HDMI port, a 5 Gbps USB-C data port, two 5 Gbps USB-A ports, and a USB C 100W PD-IN port. Note: The USB C 100W PD-IN port supports only charging and does not support data transfer devices such as headphones or speakers.
- Powerful Pass-Through Charging: Supports up to 85W pass-through charging so you can power up your laptop while you use the hub. Note: Pass-through charging requires a charger (not included). Note: To achieve full power for iPad, we recommend using a 45W wall charger.
- Transfer Files in Seconds: Move files to and from your laptop at speeds of up to 5 Gbps via the USB-C and USB-A data ports. Note: The USB C 5Gbps Data port does not support video output.
- HD Display: Connect to the HDMI port to stream or mirror content to an external monitor in resolutions of up to 4K@30Hz. Note: The USB-C ports do not support video output.
- What You Get: Anker 332 USB-C Hub (5-in-1), welcome guide, our worry-free 18-month warranty, and friendly customer service.
Rank #4
- Dual Converters, Infinite Potential：Includes 2× USB C male to USB A female adapters and 2× USB A male to USB C female adapters. Perfect for a wide range of uses—tablets with Bluetooth keyboards, expand USB ports on macbook, and more. Two different converters for all your daily needs
- Next-Level 10Gbps & 3A Charging: No more slow 480Mbps, this usb to usb c adapter has a transfer speed of up to 10Gbps, allowing you to do more transferring in less time. This usb adapter fits both USB A and USB C charger, supporting up to 3A fast charging
- Upgraded Exquisite Craftsmanship: With an aluminum alloy housing and metal connector, the usbc to usb adapter is extremely durable and sturdy. Rigorously tested to withstand more than 10,000 times of plugging and unplugging, ensuring long-lasting performance
- Broad Compatible: The usb c to usb adapter widely supports all USB C/ USB A devices like laptops, tablets, cellphones, car chargers, and phone chargers. Such as compatible with MacBook Pro/Air 2023/2022, Thunderbolt 4/3 Devices,Apple MagSafe Watch 9/8/7/SE/Ultra, iPad Pro 2022/2021, Samsung Galaxy S23/S20/S10, and iPhone 17/16/15 Pro. Plug and play
- Please Note: To reach 10Gbps speed, keep the cable under 3.3 ft. For USB A Male to USB C adapters, try flipping the USB C connector. USB C Male to USB A adapters support bidirectional 10Gbps transfer within 3.3 ft
Rank #3
- Sleek 7-in-1 USB-C Hub: Features an HDMI port, two USB-A 3.0 ports, and a USB-C data port, each providing 5Gbps transfer speeds. It also includes a USB-C PD input port for charging up to 100W and dual SD and TF card slots, all in a compact design.
- Flawless 4K@60Hz Video with HDMI: Delivers exceptional clarity and smoothness with its 4K@60Hz HDMI port, making it ideal for high-definition presentations and entertainment. (Note: Only the HDMI port supports video projection; the USB-C port is for data transfer only.)
- Double Up on Efficiency: The two USB-A 3.0 ports and a USB-C port support a fast 5Gbps data rate, significantly boosting your transfer speeds and improving productivity.
- Fast and Reliable 85W Charging: Offers high-capacity, speedy charging for laptops up to 85W, so you spend less time tethered to an outlet and more time being productive.
- What You Get: Anker USB-C Hub (7-in-1), welcome guide, 18-month warranty, and our friendly customer service.
Product prices and availability are accurate as of the date/time indicated and are subject to change. Any price and availability information displayed on Amazon at the time of purchase will apply.
