What’s actually slowing this PC down?
Pick the symptom - the matching free tool is one click away.
You can relay an Indian online radio station to YouTube with FFmpeg by feeding it a station-authorized audio stream, pairing that audio with an authorized still image, encoding a video stream, and sending it to the ingest URL and stream key from YouTube Live Control Room. First, get permission: a URL that plays publicly is not proof that you may retransmit the station’s programs on YouTube.
Before you start: confirm permission and account readiness
Get rights for the broadcast you plan to make
Ask the station and relevant rights holders for written permission to retransmit the programming on YouTube. Confirm that the permission covers the recordings and compositions, the territories where viewers may watch, the planned duration, and archiving or monetization if you intend to use those features. YouTube’s live-stream terms place responsibility on the person providing the stream to hold the necessary rights for worldwide exploitation, including music licensing rights, and address territory-specific requirements and archived content. Read the YouTube livestream terms and conditions.
A station’s location in India, a publicly playable player, or a successful FFmpeg connection does not establish that a particular retransmission is authorized under Indian law or elsewhere. Requirements depend on the station, repertoire, permissions, channel, and distribution territories; confirm them with the relevant parties before going live. This is a practical permissions check, not legal advice.
Make sure YouTube Live is available on your channel
You need a channel with live streaming enabled and an encoder-ready stream in Live Control Room. YouTube says first-time live activation may take up to 24 hours, so do not leave enablement until the planned broadcast time. Check the current YouTube live-streaming tips and eligibility guidance.
#1 Best Overall
- Read Before You Buy — No Video Output: These adapters support charging and USB 2.0 data transfer, but cannot transmit video signals. Except for standard USB webcams (which use USB data only), they are not compatible with HDMI/DisplayPort cables, video-capable USB-C hubs, or docking stations with video output.
- Convert USB-A Ports to USB-C: Designed to connect USB-C earphones, cables, flash drives, card readers, and other USB-C accessories to standard USB-A ports. Plug-and-play with no drivers or software required.
- Aluminum Alloy Housing: Built with a sturdy aluminum alloy shell that aids in heat dissipation and protects against daily wear and scratches. Designed to maintain a stable and secure connection.
- Compact & Travel-Friendly: The ultra-compact design allows the adapter to stay plugged into your device without blocking adjacent ports or adding bulk, reducing wear and tear on your original USB ports.
- 12-Month Warranty: Backed by a 12-month manufacturer warranty for peace of mind. Designed to meet strict quality control standards for reliable everyday performance.
Find and test the station’s actual audio endpoint
FFmpeg needs a media endpoint it can read, not necessarily the web page where listeners press Play. A station’s player may use a direct HTTP(S) audio stream, an HLS playlist, redirects, or an authenticated feed. Ask the station for its approved stream URL and access method; do not bypass authentication or reuse a listener URL contrary to the station’s terms.
Before building the relay, test that your installed FFmpeg can open the endpoint and identify an audio stream. The command below assumes input 0 is a demuxable audio feed and input 1 is a still image. It is a template, not a tested command for every station or FFmpeg build. Check the installed build and its help for protocol options and encoders; the FFmpeg protocol documentation describes HTTP reconnect options.
Rank #2
- 5-in-1 USB-C Hub: Experience comprehensive connectivity featuring a Power Delivery input, two USB-A 2.0 ports, a USB-A 3.0 port, and an HDMI port. (Note: The USB-C power delivery input port is only for connecting an external wall charger to power your laptop and cannot power peripheral devices.)
- 90W Pass-Through Charging: Achieve optimal charging with 90W pass-through power to your laptop, supported by a total input of 100W, with the hub reserving 10W for operational efficiency. (Note: Wall charger not included.)
- Quick Data Transfers: Accelerate your productivity with rapid data transfers using a high-speed 5Gbps USB 3.0 port and two 480Mbps USB 2.0 ports.
- 4K HDMI Display: Enhance your visual experience with a hub capable of delivering 4K resolution at 30Hz in both mirror and extend modes. Please note that this hub is compatible with MacBook (macOS 12 and newer), Windows 10 and 11, ChromeOS, and laptops equipped with DP Alt Mode and Power Delivery. Note: This device is not compatible with Linux.
- What You Get: Anker USB-C Hub (5-in-1, 4K HDMI), welcome guide, 18-month warranty, and our friendly customer service.
Create a YouTube stream and protect its key
- Open YouTube Live Control Room and create or schedule the live stream.
- Copy the server URL and stream key YouTube provides for that stream. Use those exact values; do not guess or hard-code a generic ingest endpoint.
- Keep the key private as you would a password. Store it in a protected configuration or environment rather than publishing it, committing it to a repository, or sharing terminal screenshots. If it is exposed, replace or reset it in YouTube.
YouTube’s encoder setup guidance explains how to create an encoder stream and obtain its connection details: Create a YouTube live stream with an encoder.
Build the audio-plus-image FFmpeg relay
Choose an image you are allowed to use, such as station-approved artwork. The still image supplies the video track; audio-only input by itself does not satisfy this image-based video pattern. Replace every placeholder below with your real endpoint, file, and the server URL/key supplied by YouTube.
Rank #3
- Sleek 7-in-1 USB-C Hub: Features an HDMI port, two USB-A 3.0 ports, and a USB-C data port, each providing 5Gbps transfer speeds. It also includes a USB-C PD input port for charging up to 100W and dual SD and TF card slots, all in a compact design.
- Flawless 4K@60Hz Video with HDMI: Delivers exceptional clarity and smoothness with its 4K@60Hz HDMI port, making it ideal for high-definition presentations and entertainment. (Note: Only the HDMI port supports video projection; the USB-C port is for data transfer only.)
- Double Up on Efficiency: The two USB-A 3.0 ports and a USB-C port support a fast 5Gbps data rate, significantly boosting your transfer speeds and improving productivity.
- Fast and Reliable 85W Charging: Offers high-capacity, speedy charging for laptops up to 85W, so you spend less time tethered to an outlet and more time being productive.
- What You Get: Anker USB-C Hub (7-in-1), welcome guide, 18-month warranty, and our friendly customer service.
ffmpeg
-reconnect 1 -reconnect_at_eof 1 -reconnect_streamed 1
-reconnect_on_network_error 1 -reconnect_on_http_error 4xx,5xx
-reconnect_delay_max 30
-i 'https://STATION-AUDIO-STREAM-URL'
-loop 1 -framerate 30 -i 'station-artwork.jpg'
-map 1:v:0 -map 0:a:0
-c:v libx264 -tune stillimage -pix_fmt yuv420p
-c:a aac -b:a 128k -ar 44100
-f flv 'rtmps://YOUTUBE-INGEST-URL/STREAM-KEY'The input-specific reconnect flags appear before the station input so they apply to that input. The output combines the image as video with the station feed’s first audio stream, encodes H.264 video with AAC audio, and sends an FLV stream to the YouTube-provided RTMPS address. If your FFmpeg build does not include libx264, select a compatible video encoder available in that build. The example’s video frame rate is 30 fps; confirm the complete output is accepted in YouTube’s preview.
Set compatible output and network conditions
- Ingest protocol: YouTube lists RTMP/RTMPS ingestion and recommends RTMPS. Use the protocol and server URL shown in Live Control Room.
- Video: YouTube lists H.264 among supported encoder choices. The command uses
libx264where available and a still-image video track. - Audio: YouTube lists AAC or MP3. Its stereo recommendations include 44.1 kHz and 128 kbps; the template uses AAC at those audio settings. Treat them as published recommendations, not a guarantee for every endpoint or stream.
- Bandwidth: YouTube recommends available upload capacity above the total stream bitrate, with 20% headroom. Check the actual outbound stream rate and your host’s sustained upload capacity rather than relying on a brief speed-test peak.
Consult YouTube’s current encoder settings, bitrates, and resolutions guidance and streaming tips. Test with the actual input and output settings in Live Control Room.
Rank #4
- Dual Converters, Infinite Potential：Includes 2× USB C male to USB A female adapters and 2× USB A male to USB C female adapters. Perfect for a wide range of uses—tablets with Bluetooth keyboards, expand USB ports on macbook, and more. Two different converters for all your daily needs
- Next-Level 10Gbps & 3A Charging: No more slow 480Mbps, this usb to usb c adapter has a transfer speed of up to 10Gbps, allowing you to do more transferring in less time. This usb adapter fits both USB A and USB C charger, supporting up to 3A fast charging
- Upgraded Exquisite Craftsmanship: With an aluminum alloy housing and metal connector, the usbc to usb adapter is extremely durable and sturdy. Rigorously tested to withstand more than 10,000 times of plugging and unplugging, ensuring long-lasting performance
- Broad Compatible: The usb c to usb adapter widely supports all USB C/ USB A devices like laptops, tablets, cellphones, car chargers, and phone chargers. Such as compatible with MacBook Pro/Air 2023/2022, Thunderbolt 4/3 Devices,Apple MagSafe Watch 9/8/7/SE/Ultra, iPad Pro 2022/2021, Samsung Galaxy S23/S20/S10, and iPhone 17/16/15 Pro. Plug and play
- Please Note: To reach 10Gbps speed, keep the cable under 3.3 ft. For USB A Male to USB C adapters, try flipping the USB C connector. USB C Male to USB A adapters support bidirectional 10Gbps transfer within 3.3 ft
Test, go live, and monitor the relay
- Start with a private or unlisted test stream, if appropriate for your channel and rights. Check that Live Control Room receives signal and shows a preview.
- Listen to the preview and live player. Confirm the station audio is present, at a usable level, and synchronized with the image; verify the visual asset displays as intended.
- Confirm the stream title, visibility, and any archive settings reflect the permissions you obtained.
- When the test is sound, start the intended broadcast and keep checking the encoder, YouTube preview, audio/video quality, and host network while it runs. YouTube advises testing, preview checks, and continuous monitoring.
Reconnect behavior and common failures
FFmpeg’s HTTP protocol supports reconnect controls such as reconnect, reconnect_at_eof for endless streams, reconnect_streamed, network-error and HTTP-error retries, and retry delay or count limits. The template enables several of these with a maximum delay setting, but retry behavior depends on the installed FFmpeg version and the station endpoint. Reconnects can help restore a feed; they do not guarantee uninterrupted service. Some providers reject repeated connections or require headers or authentication, so use the station’s approved access method and verify option support locally.
| Symptom | Likely cause | What to check or do |
|---|---|---|
| FFmpeg cannot open the station URL | The URL may be a web page rather than a media endpoint, or the feed may redirect, require access, or use a format the build cannot read. | Obtain the approved direct endpoint and access instructions from the station. Test that FFmpeg can demux its audio before adding the image and YouTube output. |
| YouTube receives no signal | The server URL or key may be incorrect, or output may not be reaching the expected ingest. | Copy the current server URL and key from the stream’s Live Control Room details, check the command’s final output URL, and inspect FFmpeg’s error output. |
| Video appears but audio is missing | The station feed may not expose an audio stream as input 0, or the selected mapping may not match its streams. | Inspect the input’s detected streams and map the actual audio stream. The template assumes input 0 has audio stream 0. |
| Preview fails or output is rejected | An encoder or format option may not be supported by the local build, or settings may not be compatible with the stream setup. | Check FFmpeg’s available encoders and protocol options, use a compatible H.264 encoder, and validate the output in YouTube preview against current encoder guidance. |
| The relay stops after a feed interruption | The endpoint may not permit retries, or recovery may exceed configured behavior. | Check FFmpeg logs, station endpoint requirements, network stability, and retry options supported by the installed build. Have an operator ready to investigate or restart; reconnect flags are not an uptime guarantee. |
| Playback buffers or drops | Available sustained upload bandwidth may be too close to the total stream bitrate or unstable. | Measure the host connection during operation and maintain YouTube’s recommended 20% upload headroom above stream bitrate. |
Or let it run in the cloud
If you do not want a machine at home to keep an FFmpeg process running, StreamNeo is a YouTube-only cloud service for looping uploaded videos, not a relay for a live radio endpoint. Upload a recording or build a playlist, add your YouTube stream key once, and go live. Nothing has to stay on at home; each slot streams what you upload up to 4K 60fps at one flat price per slot, with automatic recovery if YouTube drops the stream. The first day is free with no card. Monthly is $9.99 per month. For an Indian channel, UPI is available as well as cards. Start the free first day with StreamNeo.
Quick wins for a faster PC:
Clear out junk files and repair common Windows errorsFree Scan →Fix the driver behind crashes, sound loss and screen glitchesFind Drivers →Quick Recap
Best Value
- 5-in-1 Connectivity: Equipped with a 4K HDMI port, a 5 Gbps USB-C data port, two 5 Gbps USB-A ports, and a USB C 100W PD-IN port. Note: The USB C 100W PD-IN port supports only charging and does not support data transfer devices such as headphones or speakers.
- Powerful Pass-Through Charging: Supports up to 85W pass-through charging so you can power up your laptop while you use the hub. Note: Pass-through charging requires a charger (not included). Note: To achieve full power for iPad, we recommend using a 45W wall charger.
- Transfer Files in Seconds: Move files to and from your laptop at speeds of up to 5 Gbps via the USB-C and USB-A data ports. Note: The USB C 5Gbps Data port does not support video output.
- HD Display: Connect to the HDMI port to stream or mirror content to an external monitor in resolutions of up to 4K@30Hz. Note: The USB-C ports do not support video output.
- What You Get: Anker 332 USB-C Hub (5-in-1), welcome guide, our worry-free 18-month warranty, and friendly customer service.
Product prices and availability are accurate as of the date/time indicated and are subject to change. Any price and availability information displayed on Amazon at the time of purchase will apply.
