Yes. YouTube allows up to 10 active streams per channel and up to 3 active streams per stream key, with both limits applying at the same time. Two simultaneous pre-recorded streams fit within those limits if your channel is eligible, has available capacity, and your encoder or cloud service can send two separate feeds.
What YouTube’s limits mean for two simultaneous streams
YouTube Help’s “Get started with live streaming” guidance states: “There is a limit of 10 active streams allowed per channel and 3 active streams per stream key. These limits are applied at the same time.” These are concurrent-stream limits, not a promise that any particular encoder can produce two continuous broadcasts.
- Your channel can have no more than 10 active streams at once.
- A single stream key can be used for no more than 3 active streams at once.
- Two streams are within both limits, provided other active broadcasts have not already used the channel’s capacity and neither feed would exceed its key’s limit.
For two distinct programs, create or configure two separate YouTube live events and send a feed to each. YouTube’s encoder setup guide explains that an encoder is configured with YouTube’s server URL and stream key. Its simulstreaming guidance describes configuring an encoder for a live event and repeating the process for additional streams, within YouTube’s limits. It does not specify settings for every encoder or guarantee that a particular setup will sustain two 24/7 feeds.
Check eligibility before setting up either stream
YouTube says a channel must be verified and must not have had live-streaming restrictions in the previous 90 days to start a live stream. YouTube also sets a minimum age of 16 for live streaming. Confirm that the channel meets the current requirements in YouTube Studio before building a continuous setup.
Recommended Free Tools
#1 Best Overall
- Read Before You Buy — No Video Output: These adapters support charging and USB 2.0 data transfer, but cannot transmit video signals. Except for standard USB webcams (which use USB data only), they are not compatible with HDMI/DisplayPort cables, video-capable USB-C hubs, or docking stations with video output.
- Convert USB-A Ports to USB-C: Designed to connect USB-C earphones, cables, flash drives, card readers, and other USB-C accessories to standard USB-A ports. Plug-and-play with no drivers or software required.
- Aluminum Alloy Housing: Built with a sturdy aluminum alloy shell that aids in heat dissipation and protects against daily wear and scratches. Designed to maintain a stable and secure connection.
- Compact & Travel-Friendly: The ultra-compact design allows the adapter to stay plugged into your device without blocking adjacent ports or adding bulk, reducing wear and tear on your original USB ports.
- 12-Month Warranty: Backed by a 12-month manufacturer warranty for peace of mind. Designed to meet strict quality control standards for reliable everyday performance.
Choose how to send both feeds
Local encoder and computer
You can use encoder software on a computer or a standalone hardware encoder. YouTube documents both categories, but whether one device or application can send two independent continuous feeds depends on its capabilities. Verify support for multiple simultaneous outputs, separate event configurations, and sustained operation before relying on a specific model or application.
A local setup also depends on the computer, encoder, power, and internet connection staying available. For two feeds, check that the encoder can manage both at once and that your home or studio connection has enough outbound capacity for their combined bitrates.
Rank #2
- 5-in-1 USB-C Hub: Experience comprehensive connectivity featuring a Power Delivery input, two USB-A 2.0 ports, a USB-A 3.0 port, and an HDMI port. (Note: The USB-C power delivery input port is only for connecting an external wall charger to power your laptop and cannot power peripheral devices.)
- 90W Pass-Through Charging: Achieve optimal charging with 90W pass-through power to your laptop, supported by a total input of 100W, with the hub reserving 10W for operational efficiency. (Note: Wall charger not included.)
- Quick Data Transfers: Accelerate your productivity with rapid data transfers using a high-speed 5Gbps USB 3.0 port and two 480Mbps USB 2.0 ports.
- 4K HDMI Display: Enhance your visual experience with a hub capable of delivering 4K resolution at 30Hz in both mirror and extend modes. Please note that this hub is compatible with MacBook (macOS 12 and newer), Windows 10 and 11, ChromeOS, and laptops equipped with DP Alt Mode and Power Delivery. Note: This device is not compatible with Linux.
- What You Get: Anker USB-C Hub (5-in-1, 4K HDMI), welcome guide, 18-month warranty, and our friendly customer service.
Cloud encoder or service
A cloud encoder keeps the sending workload off your local computer, but you still need to verify that the service supports two concurrent YouTube events and can run each continuously. YouTube’s encoder guide names Gyre as a cloud-based tool for 24/7 streaming of prerecorded videos; that mention alone does not establish its current support for two concurrent feeds. Check the provider’s current specifications before choosing it.
Calculate the upload bandwidth for both streams together
YouTube’s streaming tips say total streaming bitrate should fit within available outbound bandwidth and recommend 20% headroom. For two streams, add their bitrates together; do not assess each feed as if it were the only upload.
Rank #3
- Sleek 7-in-1 USB-C Hub: Features an HDMI port, two USB-A 3.0 ports, and a USB-C data port, each providing 5Gbps transfer speeds. It also includes a USB-C PD input port for charging up to 100W and dual SD and TF card slots, all in a compact design.
- Flawless 4K@60Hz Video with HDMI: Delivers exceptional clarity and smoothness with its 4K@60Hz HDMI port, making it ideal for high-definition presentations and entertainment. (Note: Only the HDMI port supports video projection; the USB-C port is for data transfer only.)
- Double Up on Efficiency: The two USB-A 3.0 ports and a USB-C port support a fast 5Gbps data rate, significantly boosting your transfer speeds and improving productivity.
- Fast and Reliable 85W Charging: Offers high-capacity, speedy charging for laptops up to 85W, so you spend less time tethered to an outlet and more time being productive.
- What You Get: Anker USB-C Hub (7-in-1), welcome guide, 18-month warranty, and our friendly customer service.
For example, if the two encoder outputs are configured at 6 Mbps and 4 Mbps, their combined streaming bitrate is 10 Mbps. Applying YouTube’s recommended 20% headroom means the available, stable upload capacity should be at least 12.5 Mbps for those feeds, before allowing for other uploads or network use. Treat this as a planning calculation, not a guarantee: actual network capacity can fluctuate.
- Use the configured output bitrate for each feed, then add the values.
- Include any backup or redundant feed in the total if it also sends data over the same connection.
- Leave room for other devices and uploads rather than planning right at the connection’s advertised maximum.
- If you cannot sustain the aggregate bitrate, reduce the outputs or use a connection with more reliable outbound capacity.
Set up and verify two live events
- Confirm channel eligibility. Verify the channel, check for live-stream restrictions, and confirm that the channel’s active-stream capacity is available.
- Create two YouTube live events. Give each prerecorded program its own event and confirm which event corresponds to each feed.
- Configure the encoder or service twice. For each feed, enter the appropriate YouTube server URL and stream key in the relevant encoder configuration. Keep the event-to-key mapping clear so one program is not accidentally sent to the other event.
- Check concurrency and bandwidth. Ensure no stream key is already being used by more than its allowed number of active feeds, and confirm the combined bitrate fits the available upload with YouTube’s recommended headroom.
- Start and inspect each feed. Confirm that both events receive the intended video and show a healthy incoming feed in YouTube Studio before leaving them unattended.
- Monitor the setup. Watch for encoder, connection, or event errors. Two streams multiply the number of feed paths that can fail, so make sure you can identify which feed needs attention.
Plan for archives and DVR separately from 24/7 uptime
A live broadcast staying active for a full day does not mean YouTube will save a complete 24-hour archive. YouTube says encoder streams under 12 hours are automatically archived; streams longer than 12 hours may not be captured. YouTube’s DVR guidance also warns that rewind can be limited or unavailable for streams longer than 12 hours.
Rank #4
- Dual Converters, Infinite Potential：Includes 2× USB C male to USB A female adapters and 2× USB A male to USB C female adapters. Perfect for a wide range of uses—tablets with Bluetooth keyboards, expand USB ports on macbook, and more. Two different converters for all your daily needs
- Next-Level 10Gbps & 3A Charging: No more slow 480Mbps, this usb to usb c adapter has a transfer speed of up to 10Gbps, allowing you to do more transferring in less time. This usb adapter fits both USB A and USB C charger, supporting up to 3A fast charging
- Upgraded Exquisite Craftsmanship: With an aluminum alloy housing and metal connector, the usbc to usb adapter is extremely durable and sturdy. Rigorously tested to withstand more than 10,000 times of plugging and unplugging, ensuring long-lasting performance
- Broad Compatible: The usb c to usb adapter widely supports all USB C/ USB A devices like laptops, tablets, cellphones, car chargers, and phone chargers. Such as compatible with MacBook Pro/Air 2023/2022, Thunderbolt 4/3 Devices,Apple MagSafe Watch 9/8/7/SE/Ultra, iPad Pro 2022/2021, Samsung Galaxy S23/S20/S10, and iPhone 17/16/15 Pro. Plug and play
- Please Note: To reach 10Gbps speed, keep the cable under 3.3 ft. For USB A Male to USB C adapters, try flipping the USB C connector. USB C Male to USB A adapters support bidirectional 10Gbps transfer within 3.3 ft
If you need a complete recording, retain the source video or make a separate recording plan rather than relying on a 24-hour live stream archive. Decide whether viewers need DVR rewind, since long-running streams may not provide it as expected.
Independent reader supportYour contribution helps us test, update, and keep practical guides available for everyone.Common problems and fixes
- The second event will not start: Check the channel’s 10-stream limit and the relevant key’s 3-stream limit, counting any other active broadcasts.
- The wrong video appears on an event: Recheck the event-to-stream-key mapping in both encoder configurations and confirm each prerecorded source is assigned to the intended feed.
- Both feeds buffer or disconnect: Compare their combined output bitrate with stable outbound capacity, include other network traffic, and preserve the recommended headroom. Lower output bitrates if the connection cannot sustain the total.
- One encoder cannot send both feeds: The platform limits do not confer multi-output capability on your software or hardware. Use a configuration or service that explicitly supports two simultaneous YouTube events, or run separate encoders.
- The 24-hour archive is incomplete or DVR rewind is missing: This is consistent with YouTube’s caveats for streams longer than 12 hours. Keep a separate recording if a complete archive matters.
Or let it run in the cloud
StreamNeo is an option for keeping a prerecorded YouTube stream running from the cloud: upload a recording or build a playlist, add your YouTube stream key, and go live. For two concurrent streams, check that your channel has room under YouTube’s limits and use a separate StreamNeo slot and event configuration for each feed.
Do these 3 things before closing this tab:
1Fix the driver behind crashes, sound loss and screen glitches2Clear out junk files and repair common Windows errors3Scan for outdated or missing drivers - takes under a minuteBest Value
- 5-in-1 Connectivity: Equipped with a 4K HDMI port, a 5 Gbps USB-C data port, two 5 Gbps USB-A ports, and a USB C 100W PD-IN port. Note: The USB C 100W PD-IN port supports only charging and does not support data transfer devices such as headphones or speakers.
- Powerful Pass-Through Charging: Supports up to 85W pass-through charging so you can power up your laptop while you use the hub. Note: Pass-through charging requires a charger (not included). Note: To achieve full power for iPad, we recommend using a 45W wall charger.
- Transfer Files in Seconds: Move files to and from your laptop at speeds of up to 5 Gbps via the USB-C and USB-A data ports. Note: The USB C 5Gbps Data port does not support video output.
- HD Display: Connect to the HDMI port to stream or mirror content to an external monitor in resolutions of up to 4K@30Hz. Note: The USB-C ports do not support video output.
- What You Get: Anker 332 USB-C Hub (5-in-1), welcome guide, our worry-free 18-month warranty, and friendly customer service.
- Your computer and home connection do not have to stay on.
- Uploaded video streams as made, up to 4K 60fps, at one flat price per slot, with no re-encode or quality tiers.
- StreamNeo automatically recovers if YouTube drops the stream.
- The first day is free with no card required; one free day is available per account.
Monthly pricing is $9.99 per month. Visit StreamNeo for details, or start the free day.
Frequently Asked Questions
Can one stream key send two different videos to two events?
Only if your encoder or service supports configuring separate feeds appropriately; YouTube’s stream-key limit does not establish that capability.
Does YouTube guarantee that two 24/7 broadcasts will stay live?
No. The concurrency limits describe how many streams may be active, not the reliability of a particular encoder, network, or cloud service.
Quick Recap
Product prices and availability are accurate as of the date/time indicated and are subject to change. Any price and availability information displayed on Amazon at the time of purchase will apply.
