Windows Errors? Fix Them Before They Spread
Repair common Windows errors and clear accumulated junk for a smoother, more stable PC - no reinstall needed.Free scan · no reinstallCrashes, No Sound, or Screen Glitches?
Random freezes, missing sound and display glitches usually trace back to one bad driver. Find and replace yours safely.Free scan · under a minuteFirst check whether XSplit is dropping frames in the actual YouTube output or only in the Stage preview. A preview FPS dip alone does not prove the stream is impaired. Compare XSplit’s status bar with the live output or a local recording, then check encoder load before changing settings.
Is the stream actually dropping frames?
XSplit says its Stage preview can show FPS drops while the livestream or recording remains smooth. Its support guidance says this is not a concern when CPU and GPU use are low and the resulting output is smooth. Check the XSplit status bar, then inspect the live stream or a recording rather than relying on the preview alone. See XSplit Support’s Fixing FPS-Related Issues (updated date shown: 11/08/2022).
- Preview is slow, output is smooth: the preview may be the only affected view. Avoid changing stream settings until you verify an output problem.
- Output is choppy or losing frames: continue with encoder and resource checks below.
- Output looks healthy in XSplit but viewers report stalls: test the outbound connection and YouTube stream health separately; local CPU may not be the cause.
For diagnosis, note CPU and GPU use, XSplit version, output resolution and frame rate, codec, scene and source complexity, and whether the symptom appears in the preview, local recording, or live output. The cause cannot be determined from the fact that a stream has run for a long time. Duration alone does not establish a memory leak, overheating, or defective hardware.
Check encoder errors and system load
YouTube recommends checking the live dashboard for encoder errors and checking CPU load on the encoder. Its guidance puts the distinction plainly: “You can look for encoder errors on the live dashboard and check the CPU load on your encoder.” Read YouTube Help’s live-stream troubleshooting steps while the problem is occurring, if possible.
Do these 3 things before closing this tab:
1Fix the driver behind crashes, sound loss and screen glitches2Repair Windows errors before they cause bigger problems3Scan for outdated or missing drivers - takes under a minute#1 Best Overall
- Read Before You Buy — No Video Output: These adapters support charging and USB 2.0 data transfer, but cannot transmit video signals. Except for standard USB webcams (which use USB data only), they are not compatible with HDMI/DisplayPort cables, video-capable USB-C hubs, or docking stations with video output.
- Convert USB-A Ports to USB-C: Designed to connect USB-C earphones, cables, flash drives, card readers, and other USB-C accessories to standard USB-A ports. Plug-and-play with no drivers or software required.
- Aluminum Alloy Housing: Built with a sturdy aluminum alloy shell that aids in heat dissipation and protects against daily wear and scratches. Designed to maintain a stable and secure connection.
- Compact & Travel-Friendly: The ultra-compact design allows the adapter to stay plugged into your device without blocking adjacent ports or adding bulk, reducing wear and tear on your original USB ports.
- 12-Month Warranty: Backed by a 12-month manufacturer warranty for peace of mind. Designed to meet strict quality control standards for reliable everyday performance.
- Check XSplit’s status and the YouTube live dashboard for encoder warnings or errors.
- Observe CPU and GPU use while the stream is active, not just after closing XSplit.
- Close unnecessary programs and background processes, then compare the actual output again. XSplit lists reducing competing processes as a remedy for FPS-related issues.
- Change one setting at a time and observe the result. This makes it easier to tell whether a change helped or merely shifted load elsewhere.
Lower XSplit’s processing load in a reversible order
Try the processing preference that matches the overloaded component
In XSplit Broadcaster, open Tools > Settings > Advanced. The documented choices include Prefer GPU and Prefer CPU; the default balances CPU and GPU processing. XSplit recommends trying Prefer GPU when CPU use is high, and Prefer CPU when GPU use is high. Prefer GPU uses GPU functions for accelerated video decoding and other processing, so this can move work to the GPU rather than eliminate it. Test the alternate preference and check the actual stream, not only the Stage preview. See XSplit’s Settings documentation.
Review the broadcast encoder and reduce workload if needed
- Open Broadcast and select the gear icon for the output.
- Open Video Encoding Settings and review the available codec and encoder choices. XSplit suggests testing another available video codec; choices depend on the system and software version.
- If resource use remains high, test a lower stage resolution or frame rate. Change one at a time, then inspect the live output or a recording for both smoothness and acceptable image quality.
Lower resolution or frame rate can reduce work, but it also changes what viewers receive. Choose a setting that meets the programme’s needs rather than lowering quality blindly. XSplit’s FPS guidance describes these adjustments at Fixing FPS-Related Issues.
Rank #2
- 5-in-1 USB-C Hub: Experience comprehensive connectivity featuring a Power Delivery input, two USB-A 2.0 ports, a USB-A 3.0 port, and an HDMI port. (Note: The USB-C power delivery input port is only for connecting an external wall charger to power your laptop and cannot power peripheral devices.)
- 90W Pass-Through Charging: Achieve optimal charging with 90W pass-through power to your laptop, supported by a total input of 100W, with the hub reserving 10W for operational efficiency. (Note: Wall charger not included.)
- Quick Data Transfers: Accelerate your productivity with rapid data transfers using a high-speed 5Gbps USB 3.0 port and two 480Mbps USB 2.0 ports.
- 4K HDMI Display: Enhance your visual experience with a hub capable of delivering 4K resolution at 30Hz in both mirror and extend modes. Please note that this hub is compatible with MacBook (macOS 12 and newer), Windows 10 and 11, ChromeOS, and laptops equipped with DP Alt Mode and Power Delivery. Note: This device is not compatible with Linux.
- What You Get: Anker USB-C Hub (5-in-1, 4K HDMI), welcome guide, 18-month warranty, and our friendly customer service.
Separate CPU or encoder trouble from upload trouble
If XSplit’s output looks and sounds healthy but the YouTube stream stalls, investigate the outbound connection instead of assuming the CPU is responsible. XSplit documents a Test Bandwidth button in the output encoding settings and advises setting bitrate in line with its calculated average data rate. YouTube also recommends leaving upload bandwidth headroom: its undated Streaming tips guidance says to leave 20% room.
Bitrate must fit both the selected output and the available upload capacity. YouTube’s undated live encoder settings recommendations include H.264 at 6 Mbps for 1080p/60 fps and 5 Mbps for 1080p/30 fps. These are platform recommendations, not a guarantee that a particular connection can sustain them; leave the recommended upload headroom and use the values for the output you actually selected.
The Tool Desk
Outbyte PC Repair FREERepair Windows errors before they cause bigger problemsFix Now →Outbyte Driver Updater FREEFix the driver behind crashes, sound loss and screen glitchesFind Drivers →Rank #3
- Sleek 7-in-1 USB-C Hub: Features an HDMI port, two USB-A 3.0 ports, and a USB-C data port, each providing 5Gbps transfer speeds. It also includes a USB-C PD input port for charging up to 100W and dual SD and TF card slots, all in a compact design.
- Flawless 4K@60Hz Video with HDMI: Delivers exceptional clarity and smoothness with its 4K@60Hz HDMI port, making it ideal for high-definition presentations and entertainment. (Note: Only the HDMI port supports video projection; the USB-C port is for data transfer only.)
- Double Up on Efficiency: The two USB-A 3.0 ports and a USB-C port support a fast 5Gbps data rate, significantly boosting your transfer speeds and improving productivity.
- Fast and Reliable 85W Charging: Offers high-capacity, speedy charging for laptops up to 85W, so you spend less time tethered to an outlet and more time being productive.
- What You Get: Anker USB-C Hub (7-in-1), welcome guide, 18-month warranty, and our friendly customer service.
- Encoder errors or high CPU coincide with bad output: prioritize competing-process and XSplit encoder/workload checks.
- Encoder output is healthy, but the live stream has interruptions: check upload capacity, bitrate fit, and YouTube’s stream health indicators.
- Both encoder and connection warnings appear: address each independently; one problem does not rule out the other.
When a hardware encoder upgrade makes sense
Consider hardware only after the checks above indicate that encoding is CPU-bound. YouTube’s encoder setup guidance says Nvidia GPUs include NVENC hardware-based encoding, which can encode without using the CPU. That makes a compatible GPU a possible way to relieve CPU encoding load; it does not guarantee that a particular card will work with your PC or XSplit configuration. See Create a YouTube live stream with an encoder.
Before buying, verify the GPU and encoder options supported by your installed XSplit version, driver compatibility, power-supply capacity, and case clearance. Hardware encoding can shift work to the GPU, so confirm that it is appropriate for your system rather than treating a new graphics card as a universal fix.
Rank #4
- Dual Converters, Infinite Potential：Includes 2× USB C male to USB A female adapters and 2× USB A male to USB C female adapters. Perfect for a wide range of uses—tablets with Bluetooth keyboards, expand USB ports on macbook, and more. Two different converters for all your daily needs
- Next-Level 10Gbps & 3A Charging: No more slow 480Mbps, this usb to usb c adapter has a transfer speed of up to 10Gbps, allowing you to do more transferring in less time. This usb adapter fits both USB A and USB C charger, supporting up to 3A fast charging
- Upgraded Exquisite Craftsmanship: With an aluminum alloy housing and metal connector, the usbc to usb adapter is extremely durable and sturdy. Rigorously tested to withstand more than 10,000 times of plugging and unplugging, ensuring long-lasting performance
- Broad Compatible: The usb c to usb adapter widely supports all USB C/ USB A devices like laptops, tablets, cellphones, car chargers, and phone chargers. Such as compatible with MacBook Pro/Air 2023/2022, Thunderbolt 4/3 Devices,Apple MagSafe Watch 9/8/7/SE/Ultra, iPad Pro 2022/2021, Samsung Galaxy S23/S20/S10, and iPhone 17/16/15 Pro. Plug and play
- Please Note: To reach 10Gbps speed, keep the cable under 3.3 ft. For USB A Male to USB C adapters, try flipping the USB C connector. USB C Male to USB A adapters support bidirectional 10Gbps transfer within 3.3 ft
Common symptoms and what to check
| What you see | First check | Next step |
|---|---|---|
| Stage preview FPS falls, but viewers and recording see smooth video | Compare the XSplit status bar with the actual output and CPU/GPU use. | Do not treat the preview alone as proof of a stream failure. |
| Live output is choppy and CPU is high | Check YouTube encoder errors and close unnecessary processes. | Test the relevant CPU/GPU preference, another available codec, then lower resolution or frame rate. |
| Live output is healthy in the encoder but viewers report stalls | Check YouTube stream health and available upload capacity. | Use XSplit’s Test Bandwidth and bitrate guidance; leave YouTube’s recommended upload headroom. |
| CPU improves after selecting Prefer GPU, but GPU load rises | Check whether the GPU is now the limiting resource. | Use the preference that fits the actual bottleneck; avoid assuming processing has disappeared. |
Or let it run in the cloud
If the problem is the local computer having to stay on for a continuous prerecorded YouTube stream, StreamNeo is a separate cloud option: upload a recording or build a playlist, add your YouTube stream key, and go live. It plays uploaded videos rather than broadcasting a camera, and it streams to YouTube only. Your home computer does not have to stay on; uploads stream as made, up to 4K 60fps at one flat price per slot, with automatic recovery if YouTube drops the stream. The first day is free with no card. Monthly: $9.99 per month.
Quick Recap
Best Value
- 5-in-1 Connectivity: Equipped with a 4K HDMI port, a 5 Gbps USB-C data port, two 5 Gbps USB-A ports, and a USB C 100W PD-IN port. Note: The USB C 100W PD-IN port supports only charging and does not support data transfer devices such as headphones or speakers.
- Powerful Pass-Through Charging: Supports up to 85W pass-through charging so you can power up your laptop while you use the hub. Note: Pass-through charging requires a charger (not included). Note: To achieve full power for iPad, we recommend using a 45W wall charger.
- Transfer Files in Seconds: Move files to and from your laptop at speeds of up to 5 Gbps via the USB-C and USB-A data ports. Note: The USB C 5Gbps Data port does not support video output.
- HD Display: Connect to the HDMI port to stream or mirror content to an external monitor in resolutions of up to 4K@30Hz. Note: The USB-C ports do not support video output.
- What You Get: Anker 332 USB-C Hub (5-in-1), welcome guide, our worry-free 18-month warranty, and friendly customer service.
See StreamNeo or its plans. Start the free day.
Product prices and availability are accurate as of the date/time indicated and are subject to change. Any price and availability information displayed on Amazon at the time of purchase will apply.
