What’s actually slowing this PC down?
Pick the symptom - the matching free tool is one click away.
For a music-focused YouTube stream in XSplit Broadcaster, set the selected YouTube output’s audio encoding, route only the intended music sources into the stream, and check the YouTube preview before publishing. “No camera” is not the same as “no video signal”: the available documentation explains audio controls and routing, but does not establish that YouTube accepts a live ingest with no video. If you want a music stream without camera footage, use a suitable visual scene rather than assuming an audio-only signal will work.
Set up the YouTube Live output in XSplit
- Confirm YouTube Live is enabled. Check YouTube Studio for the channel’s current eligibility and enablement steps. XSplit’s YouTube Live guide, updated in 2025, describes channel verification and no live restriction in the preceding 90 days as prerequisites, and says first-time enablement may take up to 24 hours. Treat those details as dated guidance and confirm the current Studio flow: XSplit’s YouTube Live guide.
- Select or configure the YouTube output. In XSplit Broadcaster, open the Broadcast menu and choose the YouTube Live output. Follow its authorization and broadcast details flow to enter the title, description, category, privacy, and latency options appropriate to the channel.
- Open the output properties and inspect Audio Encoding. XSplit’s output properties include controls for audio codec, bitrate, and format. Use only the choices actually shown for your selected output; service restrictions can limit what is available. See XSplit’s Output Plugin Properties documentation, updated 2026-06-25.
Choose audio settings without guessing a bitrate
Set the codec, audio bitrate, and format from the options exposed by the YouTube output. The reviewed documentation does not establish one universal YouTube audio bitrate for this specific workflow, so do not copy a number from an unrelated video preset or assume every output offers the same choices. Check YouTube’s current recommendation for the exact streaming mode you are using, then compare it with the values XSplit actually permits.
Keep audio bitrate distinct from video bitrate. XSplit’s general output guidance says to follow the platform’s recommended bitrate and account for resolution, frame rate, and available upload speed. For x264, it notes that most streaming platforms require CBR (constant bitrate). That advice concerns the output’s broader encoding configuration; it does not set a universal audio bitrate. Refer to XSplit’s output settings guidance and match the settings to the selected YouTube output.
Route music in and unwanted computer audio out
Check each relevant source’s audio routing rather than assuming the music is the only sound being sent. XSplit’s documented routing flow says sources default to System Sound; setting a source’s Audio Output to Stream Only routes that source directly to the recording or stream. The setting is useful when a source should reach the broadcast without being routed through system sound, but it does not itself identify or filter the music for you.
#1 Best Overall
- Read Before You Buy — No Video Output: These adapters support charging and USB 2.0 data transfer, but cannot transmit video signals. Except for standard USB webcams (which use USB data only), they are not compatible with HDMI/DisplayPort cables, video-capable USB-C hubs, or docking stations with video output.
- Convert USB-A Ports to USB-C: Designed to connect USB-C earphones, cables, flash drives, card readers, and other USB-C accessories to standard USB-A ports. Plug-and-play with no drivers or software required.
- Aluminum Alloy Housing: Built with a sturdy aluminum alloy shell that aids in heat dissipation and protects against daily wear and scratches. Designed to maintain a stable and secure connection.
- Compact & Travel-Friendly: The ultra-compact design allows the adapter to stay plugged into your device without blocking adjacent ports or adding bulk, reducing wear and tear on your original USB ports.
- 12-Month Warranty: Backed by a 12-month manufacturer warranty for peace of mind. Designed to meet strict quality control standards for reliable everyday performance.
- Open the source’s audio output controls in Broadcaster.
- Choose Stream Only for a source that should go directly to the stream.
- Review the Audio Mixer and confirm the intended music and any deliberately included audio are present, while unrelated desktop sounds are not.
XSplit Support describes the behavior this way: “By setting a source’s audio output to Stream Only, their sound will be routed directly to the recording or stream.” See Multitracking Your Audio (updated 2022-11-08).
Account for XSplit version differences
The exact Audio Mixer and pre-stream dialogs depend on the installed Broadcaster version. XSplit’s May 2026 release notes identify Broadcaster 4.6.2605.2109 and say Presentation Sources became the default Audio Mode; Default Speaker and Default Microphones are added by default to the Audio Mixer. The notes also report updated YouTube Live pre-stream dialogs. If your screen differs, use the controls and labels in your installed version rather than expecting an older walkthrough to match exactly: XSplit Broadcaster 4.6 release notes.
Rank #2
- 5-in-1 USB-C Hub: Experience comprehensive connectivity featuring a Power Delivery input, two USB-A 2.0 ports, a USB-A 3.0 port, and an HDMI port. (Note: The USB-C power delivery input port is only for connecting an external wall charger to power your laptop and cannot power peripheral devices.)
- 90W Pass-Through Charging: Achieve optimal charging with 90W pass-through power to your laptop, supported by a total input of 100W, with the hub reserving 10W for operational efficiency. (Note: Wall charger not included.)
- Quick Data Transfers: Accelerate your productivity with rapid data transfers using a high-speed 5Gbps USB 3.0 port and two 480Mbps USB 2.0 ports.
- 4K HDMI Display: Enhance your visual experience with a hub capable of delivering 4K resolution at 30Hz in both mirror and extend modes. Please note that this hub is compatible with MacBook (macOS 12 and newer), Windows 10 and 11, ChromeOS, and laptops equipped with DP Alt Mode and Power Delivery. Note: This device is not compatible with Linux.
- What You Get: Anker USB-C Hub (5-in-1, 4K HDMI), welcome guide, 18-month warranty, and our friendly customer service.
Check the stream before publishing
- When practical, start with a private or unlisted broadcast and inspect the YouTube preview and sound.
- Confirm that the music plays at the intended level and that no unrelated system sounds are audible.
- Check that the visual scene appears as intended. If the channel is not showing a camera, use an appropriate static or low-motion visual if it suits the presentation.
- Publish according to the channel’s intended privacy plan only after checking the preview. This is a prudent workflow, not a claimed YouTube requirement.
What “audio-only” can mean on YouTube
If by audio-only you mean a music broadcast with no camera footage, the steps above address its audio encoding and routing. A YouTube live stream may still need a visual program; the cited XSplit materials do not settle whether YouTube currently accepts an ingest that has no video signal at all. Do not treat an audio setting or a successful local audio mix as proof that a no-video ingest is supported.
Common problems and fixes
- The music is missing from the preview: check the source’s audio output routing and the mixer, then verify that the selected YouTube output has the intended audio encoding options.
- Desktop sounds are audible: inspect the routing of each source and remove or reroute sources that should not reach the stream. System Sound may include more than the music you meant to broadcast.
- Your desired codec, bitrate, or format is unavailable: XSplit says available audio choices may depend on the selected service. Confirm that the correct YouTube output is selected and use its available values rather than assuming another output’s controls apply.
- YouTube Live is not available for the channel: check the current YouTube Studio eligibility and enablement flow. XSplit’s 2025 guide notes that first-time activation may take up to 24 hours, but current channel status and platform guidance should govern.
- The stream has no picture: the reviewed sources do not confirm that YouTube accepts a no-video ingest. Add a suitable visual scene and check the YouTube preview instead of relying on an audio-only signal.
Or let it run in the cloud
If the goal is to keep a YouTube music stream running continuously, StreamNeo is an alternative to leaving XSplit and a computer running at home. Upload a recording or build a playlist, add your YouTube stream key once, and go live. StreamNeo loops uploaded videos from the cloud; it does not stream from a camera. Nothing has to stay on at home, and automatic recovery is available if YouTube drops the stream. Every quality up to 4K 60fps streams as uploaded at one flat price per slot, with no quality tiers. The first day is free with no card. The monthly plan is $9.99 per month. StreamNeo is YouTube-only. Details: StreamNeo. Start your free first day.
Quick Recap
Best Value
- 5-in-1 Connectivity: Equipped with a 4K HDMI port, a 5 Gbps USB-C data port, two 5 Gbps USB-A ports, and a USB C 100W PD-IN port. Note: The USB C 100W PD-IN port supports only charging and does not support data transfer devices such as headphones or speakers.
- Powerful Pass-Through Charging: Supports up to 85W pass-through charging so you can power up your laptop while you use the hub. Note: Pass-through charging requires a charger (not included). Note: To achieve full power for iPad, we recommend using a 45W wall charger.
- Transfer Files in Seconds: Move files to and from your laptop at speeds of up to 5 Gbps via the USB-C and USB-A data ports. Note: The USB C 5Gbps Data port does not support video output.
- HD Display: Connect to the HDMI port to stream or mirror content to an external monitor in resolutions of up to 4K@30Hz. Note: The USB-C ports do not support video output.
- What You Get: Anker 332 USB-C Hub (5-in-1), welcome guide, our worry-free 18-month warranty, and friendly customer service.
Rank #4
- Dual Converters, Infinite Potential：Includes 2× USB C male to USB A female adapters and 2× USB A male to USB C female adapters. Perfect for a wide range of uses—tablets with Bluetooth keyboards, expand USB ports on macbook, and more. Two different converters for all your daily needs
- Next-Level 10Gbps & 3A Charging: No more slow 480Mbps, this usb to usb c adapter has a transfer speed of up to 10Gbps, allowing you to do more transferring in less time. This usb adapter fits both USB A and USB C charger, supporting up to 3A fast charging
- Upgraded Exquisite Craftsmanship: With an aluminum alloy housing and metal connector, the usbc to usb adapter is extremely durable and sturdy. Rigorously tested to withstand more than 10,000 times of plugging and unplugging, ensuring long-lasting performance
- Broad Compatible: The usb c to usb adapter widely supports all USB C/ USB A devices like laptops, tablets, cellphones, car chargers, and phone chargers. Such as compatible with MacBook Pro/Air 2023/2022, Thunderbolt 4/3 Devices,Apple MagSafe Watch 9/8/7/SE/Ultra, iPad Pro 2022/2021, Samsung Galaxy S23/S20/S10, and iPhone 17/16/15 Pro. Plug and play
- Please Note: To reach 10Gbps speed, keep the cable under 3.3 ft. For USB A Male to USB C adapters, try flipping the USB C connector. USB C Male to USB A adapters support bidirectional 10Gbps transfer within 3.3 ft
Rank #3
- Sleek 7-in-1 USB-C Hub: Features an HDMI port, two USB-A 3.0 ports, and a USB-C data port, each providing 5Gbps transfer speeds. It also includes a USB-C PD input port for charging up to 100W and dual SD and TF card slots, all in a compact design.
- Flawless 4K@60Hz Video with HDMI: Delivers exceptional clarity and smoothness with its 4K@60Hz HDMI port, making it ideal for high-definition presentations and entertainment. (Note: Only the HDMI port supports video projection; the USB-C port is for data transfer only.)
- Double Up on Efficiency: The two USB-A 3.0 ports and a USB-C port support a fast 5Gbps data rate, significantly boosting your transfer speeds and improving productivity.
- Fast and Reliable 85W Charging: Offers high-capacity, speedy charging for laptops up to 85W, so you spend less time tethered to an outlet and more time being productive.
- What You Get: Anker USB-C Hub (7-in-1), welcome guide, 18-month warranty, and our friendly customer service.
Product prices and availability are accurate as of the date/time indicated and are subject to change. Any price and availability information displayed on Amazon at the time of purchase will apply.
