To keep an OBS playlist stream running, configure two separate things: enable Automatically Reconnect for OBS’s stream output, and enable looping on the media source or playlist. The first retries the connection to YouTube after a disconnect; the second restarts media when it reaches the end. Neither guarantees uninterrupted playback, so verify recovery in YouTube Live Control Room and test your setup before leaving it unattended.
Choose the right OBS source and enable looping
One video file
- In OBS, add a Media Source and select the video file.
- Open the source’s properties and enable Loop. This restarts that file when playback reaches its end; it does not reconnect OBS to YouTube.
A playlist of files
- Add a VLC Video source and add the files in the order you want them played.
- Leave Shuffle Playlist off if the order matters, and confirm Loop Playlist is enabled; OBS documents this option as on by default.
The VLC Video source requires VLC to be installed. OBS notes that 64-bit OBS requires 64-bit VLC. If the source is missing, check that VLC is installed and matches OBS’s 64-bit architecture. OBS: Media Sources
Set OBS to reconnect after a disconnect
- In OBS, open Settings → Advanced.
- Find the output reconnection controls and enable Automatically Reconnect.
- Set Retry Delay and Maximum Retries for your operating needs. OBS’s API documentation says the retry time doubles after each attempt to avoid overloading services; a retry count of zero disables reconnecting. OBS does not specify one best YouTube-specific delay or retry limit, so choose values appropriate to your monitoring and recovery plan rather than treating any preset as a guarantee.
These settings govern OBS’s output connection, not whether your playlist repeats. OBS’s output API reference describes the reconnect behavior.
Connect OBS to the intended YouTube stream
- Open the stream in YouTube Studio’s Live Control Room and copy its stream URL and stream key.
- In OBS, open Settings → Stream. Select YouTube if you are using its service connection, or enter the stream URL and key in the applicable fields.
- Keep the stream key private: YouTube treats it like a password. If you reset the key, update OBS with the new value. You need stream owner or manager permission to reset it.
- Confirm the intended stream and its preview in Live Control Room before relying on the broadcast.
OBS’s available connection options and YouTube’s current workflow may vary. See YouTube’s guide to streaming with an encoder for its stream setup and key guidance.
#1 Best Overall
- Never Let a Dead Battery Ruin Your Drive. The LISEN 4 in 1 Retractable Car Charger delivers reliable power for your entire journey. Compatible with standard 12V cigarette lighter sockets, it keeps phones, tablets, and devices charged during daily commutes, road trips, and long drives — the perfect practical gift for dads, truck drivers, and anyone who lives on the road.
- Daily Driver Essential: Always Ready When You Need It. Featuring two retractable cables ( USB C & Old iPhone Charging Cable ) that extend up to 31.5 inches and dual USB ports, this charger solves cable clutter while charging up to 4 devices simultaneously. Ideal for busy fathers, commuters, and families who want a tidy car and never worry about low battery again.
- Deliver full-speed PD fast charging for iPhone 18 Pro Max & iPhone 18 Pro Max & iPhone 18 Pro right inside your car. The built-in 45W PD USB-C port hits the peak charging speed for these latest iPhone models, juicing up your phone to 50% power in just 15 minutes while you drive.(Note: Maximum 45W PD output is available under 24V vehicle power supply. When used with standard 12V car sockets, the peak output is limited to 36W.)
- Standard 12V Power Solution: Designed as a dedicated USB power supply for charging devices. Note: Does NOT support CarPlay, Bluetooth, or data transfer. Compatible with most phones, tablets, and small electronics. This retractable charger is a core car organization tool, keeping your vehicle tidy. Not compatible with Micro-USB devices.
- Clutter-Free Tech Organization: Featuring dual USB ports and retractable cables, the LISEN 4 in 1 charger provides a clean car storage solution. Perfect for truck enthusiasts or as a thoughtful gift for drivers, it supports fast USB-C charging for devices like the iPhone 18Pro & iPhone 18 ProMax. Keep your vehicle organized while ensuring efficient power delivery for all your tech on the road.
Understand the three controls that affect continuity
| Control | What it does | What it does not do |
|---|---|---|
| OBS Automatically Reconnect | Retries OBS’s output connection after a disconnect, subject to its retry settings. | It does not loop media or prove that viewers see a recovered broadcast. |
| Media Source Loop or VLC Loop Playlist | Restarts a file or playlist after playback ends. | It does not reconnect OBS to YouTube. |
| YouTube Auto-start and Auto-stop | Controls whether YouTube starts or stops a broadcast in response to encoder connections or disconnections, according to the stream settings. | It does not loop your local playlist or replace OBS reconnect settings. |
Decide whether the broadcast should start and stop automatically or require manual action, then check the stream’s Auto-start and Auto-stop settings in Live Control Room. The behavior is separate from OBS’s reconnect and media-loop controls. YouTube’s encoder streaming instructions
Test the complete stream before leaving it unattended
- Play representative content, including the audio and motion patterns expected during the broadcast.
- Check the Live Control Room preview and stream-health messages. Confirm the public watch page is accessible.
- Test recovery by stopping the primary encoder or disconnecting its network, then observe whether OBS retries and whether the YouTube event recovers as intended.
- If you record locally, confirm the archive file exists and continues to grow during the test.
- Check upload capacity and encoder load under representative conditions. YouTube recommends testing ahead of time and using stream-health feedback; select codec, resolution, frame rate, and bitrate from its current encoder guidance rather than assuming one profile suits every connection.
- For a critical always-on broadcast, test a backup encoder or other failover path and decide who will monitor and respond to failures.
YouTube’s live encoder settings cover supported ingest settings and recommendations. A sound ingest setup can prevent avoidable problems, but it cannot guarantee uptime. YouTube also says that encoder streams under 12 hours are automatically archived; do not assume a single broadcast will create one archive indefinitely. YouTube: Find or edit your live stream archive
Rank #2
- High Quality Material: The coaster is made of environmentally friendly silicone, safe, non-toxic and odorless. Soft with toughness, easily embedded in the cup holder. Very durable, wear-resistant, long service life. High temperature resistance, can withstand 100 ℃ high temperature water cups.
- Wide Compatibility: The coaster has a diameter of 3.15 inches and a height of 1.18 inches, which is widely used in most vehicles, such as SUV, sedan, MPV, etc., as long as the size fits your car cup holder.
- Protection Function: Our car cup holder coaster has a carry handle design and a stand-up ring edge on its edge to effectively prevent food crumbs, drinks and water from leaking out and preventing the car cup holder from getting dirty.Meanwhile,Thickened design effectively prevents the cup holder from being scratched by the cup when driving on bumpy roads and eliminates the annoying thumping sound, making your journey more enjoyable.
- Easy to Use and Clean: With embedded installation, you just need to put it flat on the car cupholder. It is also very quick to remove, there is a small bump on the coaster, pinch it and you can easily remove the coaster. It is very easy to clean, rinse with water or wipe with a wet towel (be careful not to clean with sharp tools).
- 100% Satisfaction: Our products have quality assurance, if you have questions or are not satisfied after receiving the product, don't worry, please contact us as soon as possible, we provide after-sales service.
Troubleshoot when the playlist or stream stops
- OBS disconnects and never returns: Check OBS’s connection status and logs to see whether it is retrying or has reached its maximum. Confirm Automatically Reconnect is enabled and that Maximum Retries is not zero.
- The stream stays connected but the video ends: Check that the intended source is active, the files remain accessible, and Loop or Loop Playlist is enabled. Reconnect settings cannot restart an ended media source.
- OBS reports a connection, but YouTube is offline or unhealthy: Check the Live Control Room preview and health messages, and verify the public watch page. An OBS retry alone does not confirm viewer-facing recovery.
- OBS cannot start sending to YouTube: Confirm the stream URL and key are correct and correspond to the intended event. If you reset the key, copy the new key into OBS. YouTube’s encoder troubleshooting guidance also directs third-party encoder users to update the key when needed.
- Playback stutters or health warnings appear: Test upload speed and review encoder CPU and network conditions. Use YouTube’s current settings guidance for your selected codec, resolution, frame rate, and bitrate; reduce demands if the connection or encoder cannot sustain them.
- The broadcast does not start or stop as expected: Review YouTube’s Auto-start and Auto-stop settings. These govern broadcast lifecycle, not playlist looping.
Or let it run in the cloud
If you want a YouTube playlist to continue without leaving OBS and a computer running at home, StreamNeo is a cloud service for looping uploaded videos on a YouTube channel. Upload a recording or build a playlist, add your YouTube stream key, and go live. Nothing has to stay on at home; videos stream as uploaded, up to 4K 60fps, at one price per slot regardless of quality. StreamNeo automatically recovers if YouTube drops the stream. The first day is free with no card. Monthly service is $9.99 per month.
Quick Recap
Best Value
- 🔰 UPGRADED SIDE STORAGE DESIGN - Our console cover is thinner than the old one, universal for all seasons. There is an 8.66*5.12 inch storage pocket design on each left and right side, expanding the storage space, convenient and practical. Meet the storage needs of the main passenger seat, you can store your cell phone, keys, tissues, ID and some other small daily items.
- 🔰 PREMIUM MICROFIBER LEATHER MATERIAL - This car center console cover is made of quality microfiber leather material, soft and skin-friendly touch. Exquisite and fashionable diamond shaped stitching, every detail is in place. Inside the car center console cover is made of thickened memory foam, even after squeezing, it can slowly recover to its original shape.
- 🔰 RELIEVE DRIVING FATIGUE - The arm rest cover for car adopts ergonomic design, giving just the right amount of arm support, effectively dispersing elbow pressure and relieving driving fatigue. Protect your car's center console from getting dirty or scratched. Especially suitable for long time driving or long distance traveling, bringing you a new experience of relaxation and comfort!
- 🔰 NON-DESTRUCTIVE INSTALLATION - This car console cover is designed with an elastic band for a firm fit and not easy to shake. And the back side is full of protruding dots, which can effectively avoid the armrest cover from slipping and shifting. All you need to do is to open the center console cover, put the elastic band directly into the cover and then close it.
- 🔰 BUYER'S GUIDE - You will receive a car armrest storage box with the size of 12.13*7.80 inch, please measure the size of your car's armrest storage box before you buy. We have prepared five simple and beautiful colors for you, you can choose according to your own preferences. Suitable for most of the vehicles on the market, such as car, truck, SUV, RV, van, etc.
Rank #4
- Buyer's Guide: The seat guard for car seat between seat & console measures 15.75*2.7*1.53", suitable for gaps of 1.43-1.53" in width, please double-check carefully the distance between your seat and the center console before placing an order
- Storage and Filling in One: Differ from traditional single-function gap fillers, gap filler for car incorporates storage function, offers you the convenience of storing phones and various other items, so that you can access them at any time while driving
- Avoid Items Slipping: With the bumps and vibrations of the car, phones, keys may fall into the seat crevices, which is difficult to pick up, and distracts the driver's attention. Car gap seat filler fills gaps seamlessly to create an effective barrier
- Easy to Install: Car side seat gap filler is easy to install, simply insert it into the gap between the seat and the center console, gap seat filler for car can fit tightly without affecting the normal adjustment of the seat and the use of the seat belt
- Premium Material: Crafted from premium EVA material, our car seat side gap filler boasts a combination of wear-resistant, softness&durability. Maintenance is effortless, simply rinse and wipe to quickly clean the dust and debris in corners and crevices
Rank #3
- ✅【Designed for Magsafe】 - The most fashionable iphone car mount in 2026 Magsafe is designed for iPhone 18 Pro Max/17/16/15/14/13/12 Pro Max Mini and official Magsafe cases and other magnetic phone cases and can be fixed directly to these phones without the need to affix metal plates. All Android Phones Will Work: Metal rings are provided; they fit cases and other phones without magsafe. Based on Unique Grandmaster Design (Protected by US Design Patent No. US D1,112,194 S)
- ✅【STRONG MAGNETIC MagSafe Car Mount】 - This powerful magnetic phone holder can create a powerful attraction that firmly supports your device while allowing you to drive without distraction. it easily and securely holds your phone through bumps, sharp turns or even sudden stops, no worrying of dropping your phone.
- ✅【SUPER STICK FORCE】 - VHB Dash Mounted Holders adhesive provides strong stick force between the dashboard and the car phone holder, which can firmly stick to any plane in the car, fix your device, adapt to a variety of road conditions such as sudden braking, speed bump, and rugged mountain road.
- ✅【SAFE DRIVING VIEW】 - Mini-size, not taking up space, it is placed in the dashboard without blocking the view at all, and does not need to look down at the device to ensure your safe driving. Cell Phone Car Mount is suitable for most cars, pickups, SUV, taxi; It is the best assistant for Uber and Lyft drivers
- ✅【360° FREE ROTATION】 - With an adjustable swivel ball joint, you can rotate your smartphone or device at your own will, providing the best viewing angle. Quickly pick and place with one hand, free your hands and make calls and GPS navigation more convenient
Start your free day on StreamNeo.
Product prices and availability are accurate as of the date/time indicated and are subject to change. Any price and availability information displayed on Amazon at the time of purchase will apply.
Quick wins for a faster PC:
Clear out junk files and repair common Windows errorsFree Scan →Scan for outdated or missing drivers - takes under a minuteDriver Scan →




