PC Slower Than It Used to Be?
A free scan shows the junk files, broken settings and background clutter dragging Windows down - then fixes them in one click.Free scan · Windows 10 & 11Crashes, No Sound, or Screen Glitches?
Random freezes, missing sound and display glitches usually trace back to one bad driver. Find and replace yours safely.Free scan · under a minuteHow do I stop OBS from freezing when looping a video overnight? There is no single setting that guarantees OBS will stay stable, but you can narrow down the cause with controlled tests: verify the loop setting, compare hardware decoding on and off, simplify the scene, and inspect a log from the session that failed. If you record, choose MKV or FLV to reduce the risk of losing the recording if OBS is interrupted.
First distinguish what “freezing” means: OBS may become unresponsive, only the preview may stop updating, or the saved recording may show one frozen frame while its duration continues. Those symptoms do not establish the same cause. Use the affected session and its log to investigate rather than assuming a particular setting or component is responsible.
Start by identifying what froze
Before changing settings, note your OBS version and operating system, the video file type, and what happened during the failure. Check whether the whole computer became unresponsive, whether OBS alone stopped responding, whether only the preview froze, whether recording continued, and whether the resulting file plays normally.
- OBS itself is unresponsive: save the affected-session log and any crash information. Graphics-hooking applications, overlays, and other capture or recording tools can cause unusual behavior.
- The preview is stuck: inspect the recording and log before concluding the stream or recording also stopped. A frozen preview alone does not prove the output is frozen.
- The recording continues in duration but shows a frozen frame: treat this as an output, encoding, or source symptom distinct from an unresponsive OBS window. The symptom alone is not enough to identify its cause.
- The recording is missing or corrupt after an interruption: change the recording container for future sessions; that reduces a file-recovery risk but does not prevent OBS from freezing.
Check that the video source is actually set to loop
For one lecture file: Media Source
In the affected scene, open the Media Source properties and verify Loop is enabled. OBS documentation describes Loop as making the file play again after it completes; its documented default is Off. Restart playback when source becomes active is a separate setting, documented as On by default. These options do different jobs: restarting on activation is not a substitute for looping. See the OBS Project’s Media Sources documentation (dated January 11, 2022).
#1 Best Overall
- Read Before You Buy — No Video Output: These adapters support charging and USB 2.0 data transfer, but cannot transmit video signals. Except for standard USB webcams (which use USB data only), they are not compatible with HDMI/DisplayPort cables, video-capable USB-C hubs, or docking stations with video output.
- Convert USB-A Ports to USB-C: Designed to connect USB-C earphones, cables, flash drives, card readers, and other USB-C accessories to standard USB-A ports. Plug-and-play with no drivers or software required.
- Aluminum Alloy Housing: Built with a sturdy aluminum alloy shell that aids in heat dissipation and protects against daily wear and scratches. Designed to maintain a stable and secure connection.
- Compact & Travel-Friendly: The ultra-compact design allows the adapter to stay plugged into your device without blocking adjacent ports or adding bulk, reducing wear and tear on your original USB ports.
- 12-Month Warranty: Backed by a 12-month manufacturer warranty for peace of mind. Designed to meet strict quality control standards for reliable everyday performance.
For a playlist: VLC Video
If you use a VLC Video source for a playlist, verify Loop Playlist. VLC must be installed; 64-bit OBS requires 64-bit VLC. For a single local file, Media Source is the simpler option; use VLC Video when playlist handling or format support is needed.
Test hardware decoding both ways
In Media Source properties, compare behavior with hardware decoding enabled and disabled, changing only that setting between runs. OBS documents hardware decoding as Off by default and says it uses the GPU when that GPU has a suitable decoder. Enabling it is not a guaranteed fix: GPU and driver behavior, media codec, and system workload can affect the result. Keep the version and file the same for both tests and record which configuration was used.
Rank #2
- 5-in-1 USB-C Hub: Experience comprehensive connectivity featuring a Power Delivery input, two USB-A 2.0 ports, a USB-A 3.0 port, and an HDMI port. (Note: The USB-C power delivery input port is only for connecting an external wall charger to power your laptop and cannot power peripheral devices.)
- 90W Pass-Through Charging: Achieve optimal charging with 90W pass-through power to your laptop, supported by a total input of 100W, with the hub reserving 10W for operational efficiency. (Note: Wall charger not included.)
- Quick Data Transfers: Accelerate your productivity with rapid data transfers using a high-speed 5Gbps USB 3.0 port and two 480Mbps USB 2.0 ports.
- 4K HDMI Display: Enhance your visual experience with a hub capable of delivering 4K resolution at 30Hz in both mirror and extend modes. Please note that this hub is compatible with MacBook (macOS 12 and newer), Windows 10 and 11, ChromeOS, and laptops equipped with DP Alt Mode and Power Delivery. Note: This device is not compatible with Linux.
- What You Get: Anker USB-C Hub (5-in-1, 4K HDMI), welcome guide, 18-month warranty, and our friendly customer service.
Reduce scene and rendering workload
OBS uses GPU resources to composite and render a scene. For a controlled test, duplicate or simplify the affected scene and remove sources and filters that are not needed for the lecture. Browser sources, overlays, and other scene elements can add work; complex sources may demand resources even when they are not visible. Use media no higher in resolution than your actual output requires, if a lower-resolution copy is sufficient.
Compare the original scene with the minimal version while keeping the video, output settings, and other conditions the same. OBS’s Encoding Performance Troubleshooting guide (dated June 12, 2021) explains the role of GPU workload and scene complexity. System requirements alone do not guarantee a particular workload will run smoothly; OBS notes that performance depends on what is being encoded and the sources in use.
Do these 3 things before closing this tab:
1Repair Windows errors before they cause bigger problems2Fix the driver behind crashes, sound loss and screen glitches3Clear out junk files and repair common Windows errorsRank #3
- Sleek 7-in-1 USB-C Hub: Features an HDMI port, two USB-A 3.0 ports, and a USB-C data port, each providing 5Gbps transfer speeds. It also includes a USB-C PD input port for charging up to 100W and dual SD and TF card slots, all in a compact design.
- Flawless 4K@60Hz Video with HDMI: Delivers exceptional clarity and smoothness with its 4K@60Hz HDMI port, making it ideal for high-definition presentations and entertainment. (Note: Only the HDMI port supports video projection; the USB-C port is for data transfer only.)
- Double Up on Efficiency: The two USB-A 3.0 ports and a USB-C port support a fast 5Gbps data rate, significantly boosting your transfer speeds and improving productivity.
- Fast and Reliable 85W Charging: Offers high-capacity, speedy charging for laptops up to 85W, so you spend less time tethered to an outlet and more time being productive.
- What You Get: Anker USB-C Hub (7-in-1), welcome guide, 18-month warranty, and our friendly customer service.
On Windows, test with HAGS disabled
If you use Windows, test Hardware-accelerated GPU scheduling (HAGS) off. OBS says HAGS may cause performance problems or failures with OBS and hardware encoders and recommends disabling it as a troubleshooting step for performance issues or freezing. This is a Windows-specific test, not an explanation for every freeze.
- In Windows, open Settings > System > Display > Graphics > Change default graphics settings.
- Turn off Hardware-accelerated GPU scheduling, if the setting is available.
- Restart Windows, then repeat the same OBS test with the same scene and media.
- If the comparison does not help, restore the previous setting rather than treating HAGS as the confirmed cause.
See OBS Project’s HAGS troubleshooting guidance (dated May 7, 2023). Windows labels and setting availability can vary by version and hardware.
Rank #4
- Dual Converters, Infinite Potential：Includes 2× USB C male to USB A female adapters and 2× USB A male to USB C female adapters. Perfect for a wide range of uses—tablets with Bluetooth keyboards, expand USB ports on macbook, and more. Two different converters for all your daily needs
- Next-Level 10Gbps & 3A Charging: No more slow 480Mbps, this usb to usb c adapter has a transfer speed of up to 10Gbps, allowing you to do more transferring in less time. This usb adapter fits both USB A and USB C charger, supporting up to 3A fast charging
- Upgraded Exquisite Craftsmanship: With an aluminum alloy housing and metal connector, the usbc to usb adapter is extremely durable and sturdy. Rigorously tested to withstand more than 10,000 times of plugging and unplugging, ensuring long-lasting performance
- Broad Compatible: The usb c to usb adapter widely supports all USB C/ USB A devices like laptops, tablets, cellphones, car chargers, and phone chargers. Such as compatible with MacBook Pro/Air 2023/2022, Thunderbolt 4/3 Devices,Apple MagSafe Watch 9/8/7/SE/Ultra, iPad Pro 2022/2021, Samsung Galaxy S23/S20/S10, and iPhone 17/16/15 Pro. Plug and play
- Please Note: To reach 10Gbps speed, keep the cable under 3.3 ft. For USB A Male to USB C adapters, try flipping the USB C connector. USB C Male to USB A adapters support bidirectional 10Gbps transfer within 3.3 ft
Use a log from the session that failed
A log from a different or uneventful session may not contain evidence of the freeze. Reproduce the issue, then use the affected session’s log:
- In OBS, open Help > Log Files > Upload Current Log File after the test session.
- Open the uploaded log in the OBS Log Analyzer and review its findings.
- When asking for help, include that log and any crash information, along with your OBS version, operating system, media type, and a precise description of whether OBS, the preview, or the recording froze.
The Log Analyzer page has no publication date shown. Treat its findings as a way to inspect that particular session, not as proof that one suspected setting caused every overnight failure.
What’s actually slowing this PC down?
Pick the symptom - the matching free tool is one click away.
Best Value
- 5-in-1 Connectivity: Equipped with a 4K HDMI port, a 5 Gbps USB-C data port, two 5 Gbps USB-A ports, and a USB C 100W PD-IN port. Note: The USB C 100W PD-IN port supports only charging and does not support data transfer devices such as headphones or speakers.
- Powerful Pass-Through Charging: Supports up to 85W pass-through charging so you can power up your laptop while you use the hub. Note: Pass-through charging requires a charger (not included). Note: To achieve full power for iPad, we recommend using a 45W wall charger.
- Transfer Files in Seconds: Move files to and from your laptop at speeds of up to 5 Gbps via the USB-C and USB-A data ports. Note: The USB C 5Gbps Data port does not support video output.
- HD Display: Connect to the HDMI port to stream or mirror content to an external monitor in resolutions of up to 4K@30Hz. Note: The USB-C ports do not support video output.
- What You Get: Anker 332 USB-C Hub (5-in-1), welcome guide, our worry-free 18-month warranty, and friendly customer service.
Protect recordings if OBS is interrupted
If you record the lecture, select MKV or FLV as the recording format in OBS output settings. OBS’s Log Analyzer warns that an interrupted MP4 or MOV recording can be corrupted and unrecoverable. If your editing or delivery workflow needs MP4, remux the completed recording in OBS afterward. This protects against one class of interrupted-file corruption; it does not stop runtime freezes.
Check for overlays and capture conflicts
When OBS itself hangs or behaves unusually, close overlays and other graphics-hooking, capture, or recording applications for a controlled test. OBS identifies graphics-hooking applications as a possible source of crashes or unusual behavior. Change only this variable, then compare the same scene and media. See OBS’s Known Application Conflicts (dated August 25, 2021).
A controlled troubleshooting order
- Write down the OBS version, operating system, file type, and exact failure symptom.
- Verify Media Source > Loop, or VLC Video > Loop Playlist for a playlist.
- Compare Media Source hardware decoding on and off, one run at a time.
- Repeat with a minimal scene and fewer unnecessary filters and sources; use a lower-resolution file only if it is adequate for the output.
- On Windows, test HAGS off and reboot before repeating the same test.
- Close overlays and other capture or recording software if the symptoms point to a conflict.
- Run a short reproduction test, then upload and inspect the current session log. A short test cannot establish overnight stability; do not call the problem fixed until a sufficiently long run succeeds.
- Use MKV or FLV for recordings you want to protect against interruption.
There is no published statistic in the cited OBS materials that establishes how often overnight looping freezes occur, and the materials do not identify one universal cause. An individual diagnosis depends on the system, OBS version, source, media codec, log, and precise symptom.
Or let it run in the cloud
If your goal is to keep uploaded lecture videos looping as a YouTube live stream, StreamNeo is a cloud alternative rather than an OBS repair. Upload a recording or build a playlist, add your YouTube stream key, and go live. StreamNeo keeps the stream running from the cloud, so your computer and home connection do not have to stay on.
Free tools Windows power users keep installed
One-click scans. No signup required.
- One flat price per slot for any uploaded quality up to 4K 60fps, with no re-encode or quality tiers.
- Automatic recovery if YouTube drops the stream.
- The first day is free with no card; one free day per account.
- Monthly: $9.99 per month.
StreamNeo is for uploaded videos streamed to YouTube, not live camera capture. See StreamNeo or start your free day.
Quick Recap
Product prices and availability are accurate as of the date/time indicated and are subject to change. Any price and availability information displayed on Amazon at the time of purchase will apply.
