Recommended Free Tools
To loop a local 3840×2160, 60 fps SDR video to YouTube Live with an NVIDIA GPU, use FFmpeg’s -stream_loop -1 to repeat the file and -re to read it in real time. This H.264/NVENC command is a starting point; check your source, GPU, network and YouTube stream health before relying on it.
FFmpeg command for a 4K60 SDR file
ffmpeg -re -stream_loop -1 -i "input.mp4"
-map 0:v:0 -map 0:a:0?
-c:v h264_nvenc -preset p5 -rc cbr
-b:v 50M -maxrate 50M -bufsize 100M
-g 120 -bf 2
-c:a aac -b:a 128k -ar 44100
-f flv "rtmps://YOUR_INGEST_URL/YOUR_STREAM_KEY"- Replace
input.mp4with the path to your video. - In YouTube Live Control Room, copy the ingest address and stream key into the final RTMPS URL. Keep the key private; anyone with it may be able to broadcast to your channel.
- Run the command in a terminal on a computer with a compatible NVIDIA GPU and an FFmpeg build that includes
h264_nvenc.
The command assumes the input is already 3840Ă—2160 at 60 fps, has audio, and is suitable for an SDR H.264 stream. It does not upscale or convert a different source to 4K60.
What the options do
-rereads the file at its native frame rate, pacing file playback in real time rather than sending it as fast as possible.-stream_loop -1repeats the input indefinitely. Both are input options, so they belong before-i. See the FFmpeg documentation.-map 0:v:0selects the first video stream.-map 0:a:0?selects the first audio stream if one exists; the question mark makes that mapping optional. Change the mapping if your file’s streams differ.-c:v h264_nvencselects NVIDIA’s hardware H.264 encoder.-preset p5and-rc cbrselect an encoder preset and constant-bitrate rate control; available options and performance depend on your GPU and FFmpeg build.-b:v 50Msets the target video bitrate to 50 Mbps.-maxrate 50Msets its maximum, and-bufsize 100Msets the rate-control buffer.-g 120sets a 120-frame GOP, equivalent to a two-second keyframe interval at 60 fps.-bf 2requests two B-frames.-c:a aac -b:a 128k -ar 44100encodes audio as AAC at 128 Kbps and 44.1 kHz. If your file has no audio, remove the audio mapping and audio options.-f flvselects the output container used for this RTMP(S) stream.
Match the stream to YouTube’s ingest guidance
YouTube Help’s current encoder recommendations, checked on 2026-10-03, list 50 Mbps for H.264 at 2160p60 and 35 Mbps for AV1 or H.265/HEVC at that resolution. The retrieved page does not state a publication year. It recommends CBR, a two-second keyframe frequency (not exceeding four seconds), frame rates up to 60 fps, and AAC or MP3 audio. For stereo it lists 128 Kbps and 44.1 kHz. Its advanced settings include progressive scan, two B-frames, one reference frame, square pixels and Rec. 709 for SDR. See YouTube’s encoder recommendations.
YouTube recommends RTMPS, the secure extension to RTMP. Its guidance also says 2160p streams use normal latency because low latency is unavailable at that resolution. Test with representative picture movement and audio, then watch stream health in Live Control Room before depending on the broadcast.
Quick wins for a faster PC:
Scan for outdated or missing drivers - takes under a minuteDriver Scan →Clear out junk files and repair common Windows errorsFree Scan →#1 Best Overall
- Read Before You Buy — No Video Output: These adapters support charging and USB 2.0 data transfer, but cannot transmit video signals. Except for standard USB webcams (which use USB data only), they are not compatible with HDMI/DisplayPort cables, video-capable USB-C hubs, or docking stations with video output.
- Convert USB-A Ports to USB-C: Designed to connect USB-C earphones, cables, flash drives, card readers, and other USB-C accessories to standard USB-A ports. Plug-and-play with no drivers or software required.
- Aluminum Alloy Housing: Built with a sturdy aluminum alloy shell that aids in heat dissipation and protects against daily wear and scratches. Designed to maintain a stable and secure connection.
- Compact & Travel-Friendly: The ultra-compact design allows the adapter to stay plugged into your device without blocking adjacent ports or adding bulk, reducing wear and tear on your original USB ports.
- 12-Month Warranty: Backed by a 12-month manufacturer warranty for peace of mind. Designed to meet strict quality control standards for reliable everyday performance.
Check your file, FFmpeg build, GPU and upload connection
- Inspect the source before streaming: confirm its dimensions, frame rate, audio streams, pixel format and SDR or HDR characteristics. Configure the command for what the file actually contains.
- Check encoder availability with
ffmpeg -h encoder=h264_nvenc. A listed encoder does not guarantee that your specific GPU supports the required format or can sustain a 4K60 encode. NVIDIA’s NVENC application note describes hardware encoder capabilities; supported codecs, profiles, bit depth, dimensions, frame rate and performance vary by GPU. The NVIDIA FFmpeg guide includes 4K60 and live-streaming examples. - Make sure your upload connection can sustain the video bitrate plus audio and protocol overhead, with headroom. YouTube’s recommended video bitrate alone is not the total stream bitrate.
- Watch and listen to a test broadcast. The end-to-start transition can create a visible or audible jump; use a seamless source if that matters.
Choosing a codec, including for HDR
The command uses H.264 because its 50 Mbps target matches YouTube’s listed 2160p60 H.264 recommendation. YouTube lists 35 Mbps for AV1 or HEVC at 2160p60, but that does not make either codec universally better: compatibility, supported GPU encoding and the source all matter. Check your exact card and installed FFmpeg options rather than assuming a codec or setting is available.
For HDR, do not use the SDR command unchanged. YouTube recommends H.265/HEVC over RTMP(S) for HDR, with 10-bit HDR and the relevant color metadata; its listed settings do not support AV1 for HDR. Verify that the source, encoder, metadata and full delivery path preserve the intended color characteristics before going live. See YouTube’s encoder recommendations.
Rank #2
- 5-in-1 USB-C Hub: Experience comprehensive connectivity featuring a Power Delivery input, two USB-A 2.0 ports, a USB-A 3.0 port, and an HDMI port. (Note: The USB-C power delivery input port is only for connecting an external wall charger to power your laptop and cannot power peripheral devices.)
- 90W Pass-Through Charging: Achieve optimal charging with 90W pass-through power to your laptop, supported by a total input of 100W, with the hub reserving 10W for operational efficiency. (Note: Wall charger not included.)
- Quick Data Transfers: Accelerate your productivity with rapid data transfers using a high-speed 5Gbps USB 3.0 port and two 480Mbps USB 2.0 ports.
- 4K HDMI Display: Enhance your visual experience with a hub capable of delivering 4K resolution at 30Hz in both mirror and extend modes. Please note that this hub is compatible with MacBook (macOS 12 and newer), Windows 10 and 11, ChromeOS, and laptops equipped with DP Alt Mode and Power Delivery. Note: This device is not compatible with Linux.
- What You Get: Anker USB-C Hub (5-in-1, 4K HDMI), welcome guide, 18-month warranty, and our friendly customer service.
Troubleshooting a failed or unhealthy stream
| Symptom | What to check |
|---|---|
FFmpeg cannot find or initialize h264_nvenc |
Confirm your FFmpeg build includes the encoder and your NVIDIA GPU supports the required input and 4K60 encode. Check ffmpeg -h encoder=h264_nvenc and your GPU’s capabilities. |
| YouTube does not receive the broadcast | Recheck the ingest address and stream key in Live Control Room, the RTMPS URL, outbound connectivity and firewall rules. Do not expose the key when sharing logs or command lines. |
| Stream health reports problems or playback stutters | Check network stability and available upload capacity against the full stream bitrate, not just the video target. Confirm the GPU sustains real-time encoding and review FFmpeg output and YouTube stream health. |
| No audio reaches the stream | Check whether the file contains an audio stream and whether -map 0:a:0? selects the intended one. Adjust mapping for files with a different stream layout. |
| FFmpeg exits or the stream behaves unexpectedly | Check file timestamps and formats, encoder initialization, the selected audio stream, network stability and ingest settings. Test with the same source and settings before relying on an unattended run. |
| A hitch or jump repeats at the loop point | The file’s end and beginning may not join cleanly. Edit or prepare a seamless loop if the boundary must be unobtrusive. |
Because this is file input, real-time pacing with -re is appropriate. FFmpeg cautions against applying read-rate limiting carelessly to an actual capture or live input, where it can cause packet loss.
Or let it run in the cloud
If the goal is an always-on YouTube channel rather than managing a local FFmpeg process, StreamNeo loops uploaded videos from the cloud. Upload a recording or build a playlist, add your YouTube stream key once, and go live. Your computer and home connection do not have to stay on; StreamNeo automatically recovers if YouTube drops the stream. It sends videos as uploaded, up to 4K 60fps, at one flat price per slot, with no re-encode or quality tiers. The first day is free with no card. Monthly: $9.99 per month.
Quick Recap
Best Value
- 5-in-1 Connectivity: Equipped with a 4K HDMI port, a 5 Gbps USB-C data port, two 5 Gbps USB-A ports, and a USB C 100W PD-IN port. Note: The USB C 100W PD-IN port supports only charging and does not support data transfer devices such as headphones or speakers.
- Powerful Pass-Through Charging: Supports up to 85W pass-through charging so you can power up your laptop while you use the hub. Note: Pass-through charging requires a charger (not included). Note: To achieve full power for iPad, we recommend using a 45W wall charger.
- Transfer Files in Seconds: Move files to and from your laptop at speeds of up to 5 Gbps via the USB-C and USB-A data ports. Note: The USB C 5Gbps Data port does not support video output.
- HD Display: Connect to the HDMI port to stream or mirror content to an external monitor in resolutions of up to 4K@30Hz. Note: The USB-C ports do not support video output.
- What You Get: Anker 332 USB-C Hub (5-in-1), welcome guide, our worry-free 18-month warranty, and friendly customer service.
Rank #4
- Dual Converters, Infinite Potential：Includes 2× USB C male to USB A female adapters and 2× USB A male to USB C female adapters. Perfect for a wide range of uses—tablets with Bluetooth keyboards, expand USB ports on macbook, and more. Two different converters for all your daily needs
- Next-Level 10Gbps & 3A Charging: No more slow 480Mbps, this usb to usb c adapter has a transfer speed of up to 10Gbps, allowing you to do more transferring in less time. This usb adapter fits both USB A and USB C charger, supporting up to 3A fast charging
- Upgraded Exquisite Craftsmanship: With an aluminum alloy housing and metal connector, the usbc to usb adapter is extremely durable and sturdy. Rigorously tested to withstand more than 10,000 times of plugging and unplugging, ensuring long-lasting performance
- Broad Compatible: The usb c to usb adapter widely supports all USB C/ USB A devices like laptops, tablets, cellphones, car chargers, and phone chargers. Such as compatible with MacBook Pro/Air 2023/2022, Thunderbolt 4/3 Devices,Apple MagSafe Watch 9/8/7/SE/Ultra, iPad Pro 2022/2021, Samsung Galaxy S23/S20/S10, and iPhone 17/16/15 Pro. Plug and play
- Please Note: To reach 10Gbps speed, keep the cable under 3.3 ft. For USB A Male to USB C adapters, try flipping the USB C connector. USB C Male to USB A adapters support bidirectional 10Gbps transfer within 3.3 ft
Rank #3
- Sleek 7-in-1 USB-C Hub: Features an HDMI port, two USB-A 3.0 ports, and a USB-C data port, each providing 5Gbps transfer speeds. It also includes a USB-C PD input port for charging up to 100W and dual SD and TF card slots, all in a compact design.
- Flawless 4K@60Hz Video with HDMI: Delivers exceptional clarity and smoothness with its 4K@60Hz HDMI port, making it ideal for high-definition presentations and entertainment. (Note: Only the HDMI port supports video projection; the USB-C port is for data transfer only.)
- Double Up on Efficiency: The two USB-A 3.0 ports and a USB-C port support a fast 5Gbps data rate, significantly boosting your transfer speeds and improving productivity.
- Fast and Reliable 85W Charging: Offers high-capacity, speedy charging for laptops up to 85W, so you spend less time tethered to an outlet and more time being productive.
- What You Get: Anker USB-C Hub (7-in-1), welcome guide, 18-month warranty, and our friendly customer service.
Start your free StreamNeo day.
Product prices and availability are accurate as of the date/time indicated and are subject to change. Any price and availability information displayed on Amazon at the time of purchase will apply.
