Free tools Windows power users keep installed
One-click scans. No signup required.
Keep the live output at 24 fps if your encoder supports it; you do not need to convert a 24 fps source to 30 fps just to stream it. YouTube does not publish a dedicated 24 fps live-bitrate row, so use its 30 fps figure for your chosen resolution and codec as a practical reference—not as a 24 fps prescription—and verify it with a test.
Recommended starting settings for a 24 fps live stream
For a pre-recorded video, set the encoder’s output to the source resolution and 24 fps when available. Choose a supported codec, use constant bitrate (CBR), set a two-second keyframe interval, and use RTMPS if your encoder supports it. YouTube’s live guidance allows up to 60 fps, but its bitrate table lists 30 fps and 60 fps tiers, not 24 fps.
- Frame rate: 24 fps, matching the source, if the encoder offers it.
- Resolution: Use the intended output resolution, such as 720p, 1080p, 1440p, or 2160p.
- Video codec: H.264, H.265 (HEVC), or AV1, as supported by your encoder and workflow.
- Rate control: CBR.
- Keyframes: Every two seconds; do not exceed four seconds.
- Protocol: RTMPS where supported, for encrypted delivery to YouTube.
- Audio: AAC or MP3.
YouTube’s recommended advanced video settings include square pixels, progressive scan, two B-frames, one reference frame, CABAC, and Rec. 709 for SDR.
What bitrate should you use for 24 fps?
YouTube does not give a separate live-ingest bitrate recommendation for 24 fps. The table below reproduces the 30 fps live tiers as a proxy for choosing a starting point. These are not 24 fps-specific measurements or guarantees; the YouTube Help page does not display a publication year, so check its current guidance when exact settings matter.
#1 Best Overall
- Read Before You Buy — No Video Output: These adapters support charging and USB 2.0 data transfer, but cannot transmit video signals. Except for standard USB webcams (which use USB data only), they are not compatible with HDMI/DisplayPort cables, video-capable USB-C hubs, or docking stations with video output.
- Convert USB-A Ports to USB-C: Designed to connect USB-C earphones, cables, flash drives, card readers, and other USB-C accessories to standard USB-A ports. Plug-and-play with no drivers or software required.
- Aluminum Alloy Housing: Built with a sturdy aluminum alloy shell that aids in heat dissipation and protects against daily wear and scratches. Designed to maintain a stable and secure connection.
- Compact & Travel-Friendly: The ultra-compact design allows the adapter to stay plugged into your device without blocking adjacent ports or adding bulk, reducing wear and tear on your original USB ports.
- 12-Month Warranty: Backed by a 12-month manufacturer warranty for peace of mind. Designed to meet strict quality control standards for reliable everyday performance.
| Resolution | AV1/H.265 minimum | AV1/H.265 recommended | H.264 minimum | H.264 recommended |
|---|---|---|---|---|
| 720p at 30 fps (proxy reference) | 2 Mbps | 6 Mbps | 3 Mbps | 8 Mbps |
| 1080p at 30 fps (proxy reference) | 4 Mbps | 10 Mbps | 5 Mbps | 14 Mbps |
| 1440p at 30 fps (proxy reference) | 5 Mbps | 15 Mbps | 7 Mbps | 21 Mbps |
| 2160p at 30 fps (proxy reference) | 8 Mbps | 30 Mbps | 11 Mbps | 42 Mbps |
Start with the recommended value for your resolution and codec if your connection can sustain it. The minimum values are lower reference points, not targets that guarantee acceptable quality. Choose a bitrate your upload connection can hold steadily; YouTube’s streaming tips recommend keeping 20% upload-bandwidth headroom, with total stream bitrate fitting within available upload capacity. Leave room for audio and normal connection variation rather than setting the video bitrate at the full measured upload rate.
Configure and test the encoder
- Set the output format. In your encoder, select the source resolution and 24 fps output if available. Choose H.264, H.265, or AV1 if supported, and set rate control to CBR. YouTube’s Live Control Room generally detects the encoder’s resolution and frame rate automatically.
- Choose a bitrate reference. Use the 30 fps row for your resolution and codec in the table above as a starting reference, remembering that it is not a dedicated 24 fps recommendation. Reduce the setting if your connection cannot sustain it reliably.
- Set keyframes and delivery protocol. Set a two-second keyframe interval, never longer than four seconds, and select RTMPS if available.
- Check the remaining video and audio settings. Where the encoder exposes them, use square pixels, progressive scan, two B-frames, one reference frame, CABAC, Rec. 709 for SDR, and AAC or MP3 audio.
- Run a representative test. Include audio and movement similar to the intended stream. Check the Live Control Room preview, stream health, and any messages before relying on the setup. YouTube’s general tips recommend setting up at least two hours ahead and starting the encoder at least 15 minutes before a scheduled event.
- Confirm stability at the intended quality. If the preview or stream health indicates a problem, lower the bitrate or resolution and test again. Do not compensate for an unstable connection by choosing a bitrate it cannot sustain.
Do you need to convert 24 fps to 30 fps?
No. YouTube’s upload guidance says to encode and upload at the frame rate at which the content was recorded and lists 24 fps as a common frame rate. That upload advice is distinct from live-ingest bitrate guidance, but it gives no reason to convert a 24 fps source solely to make it a live stream. If your encoder cannot output 24 fps, check its supported output modes and test the available option; do not assume that changing to 30 fps will improve the result.
Rank #2
- 5-in-1 USB-C Hub: Experience comprehensive connectivity featuring a Power Delivery input, two USB-A 2.0 ports, a USB-A 3.0 port, and an HDMI port. (Note: The USB-C power delivery input port is only for connecting an external wall charger to power your laptop and cannot power peripheral devices.)
- 90W Pass-Through Charging: Achieve optimal charging with 90W pass-through power to your laptop, supported by a total input of 100W, with the hub reserving 10W for operational efficiency. (Note: Wall charger not included.)
- Quick Data Transfers: Accelerate your productivity with rapid data transfers using a high-speed 5Gbps USB 3.0 port and two 480Mbps USB 2.0 ports.
- 4K HDMI Display: Enhance your visual experience with a hub capable of delivering 4K resolution at 30Hz in both mirror and extend modes. Please note that this hub is compatible with MacBook (macOS 12 and newer), Windows 10 and 11, ChromeOS, and laptops equipped with DP Alt Mode and Power Delivery. Note: This device is not compatible with Linux.
- What You Get: Anker USB-C Hub (5-in-1, 4K HDMI), welcome guide, 18-month warranty, and our friendly customer service.
Software encoder or standalone hardware?
YouTube supports software apps and standalone hardware encoders. Its verified-encoder listings identify products as third-party tools, not products made by YouTube. YouTube’s streaming tips recommend professional-grade hardware for higher-production events, while noting that equipment a creator already has may be enough to get started. A standalone hardware encoder is optional for a simple pre-recorded-video relay; 24 fps itself does not require dedicated hardware.
Troubleshooting common problems
- You cannot find a 24 fps bitrate setting: YouTube’s live table has no 24 fps row. Set the output frame rate to 24 fps if supported and use the corresponding 30 fps resolution-and-codec bitrate tier as a starting reference.
- The stream buffers, drops frames, or reports poor health: The chosen bitrate may exceed stable upload capacity. Lower the bitrate or resolution, preserve the recommended 20% bandwidth headroom, and test again.
- The preview looks juddery or motion does not match the recording: Confirm the encoder is outputting the intended frame rate and that the source plays correctly. Test with representative motion before scheduling the stream; converting frame rates can change motion cadence.
- The stream does not connect securely: Confirm the selected protocol and encoder support RTMPS, then check the Live Control Room’s stream status and messages. RTMPS is YouTube’s recommended encrypted delivery option where supported.
- Audio is missing or out of sync: Check that an audio track is enabled, that the encoder uses AAC or MP3, and that the test includes the same audio setup as the intended stream.
Or let it run in the cloud
For a YouTube channel that needs to keep a pre-recorded video live without leaving an encoder running at home, StreamNeo uploads and loops your video from the cloud. Upload a recording or build a playlist, add your YouTube stream key once, and go live. Nothing has to stay on at home; videos stream as uploaded at any quality up to 4K 60fps for one flat price per slot, with automatic recovery if YouTube drops the stream. The first day is free with no card required. Monthly billing is $9.99 per month. See StreamNeo or start your free first day.
Crashes, No Sound, or Screen Glitches?
Random freezes, missing sound and display glitches usually trace back to one bad driver. Find and replace yours safely.Free scan · under a minuteWindows Errors? Fix Them Before They Spread
Repair common Windows errors and clear accumulated junk for a smoother, more stable PC - no reinstall needed.Free scan · no reinstallQuick Recap
Best Value
- 5-in-1 Connectivity: Equipped with a 4K HDMI port, a 5 Gbps USB-C data port, two 5 Gbps USB-A ports, and a USB C 100W PD-IN port. Note: The USB C 100W PD-IN port supports only charging and does not support data transfer devices such as headphones or speakers.
- Powerful Pass-Through Charging: Supports up to 85W pass-through charging so you can power up your laptop while you use the hub. Note: Pass-through charging requires a charger (not included). Note: To achieve full power for iPad, we recommend using a 45W wall charger.
- Transfer Files in Seconds: Move files to and from your laptop at speeds of up to 5 Gbps via the USB-C and USB-A data ports. Note: The USB C 5Gbps Data port does not support video output.
- HD Display: Connect to the HDMI port to stream or mirror content to an external monitor in resolutions of up to 4K@30Hz. Note: The USB-C ports do not support video output.
- What You Get: Anker 332 USB-C Hub (5-in-1), welcome guide, our worry-free 18-month warranty, and friendly customer service.
Rank #4
- Dual Converters, Infinite Potential：Includes 2× USB C male to USB A female adapters and 2× USB A male to USB C female adapters. Perfect for a wide range of uses—tablets with Bluetooth keyboards, expand USB ports on macbook, and more. Two different converters for all your daily needs
- Next-Level 10Gbps & 3A Charging: No more slow 480Mbps, this usb to usb c adapter has a transfer speed of up to 10Gbps, allowing you to do more transferring in less time. This usb adapter fits both USB A and USB C charger, supporting up to 3A fast charging
- Upgraded Exquisite Craftsmanship: With an aluminum alloy housing and metal connector, the usbc to usb adapter is extremely durable and sturdy. Rigorously tested to withstand more than 10,000 times of plugging and unplugging, ensuring long-lasting performance
- Broad Compatible: The usb c to usb adapter widely supports all USB C/ USB A devices like laptops, tablets, cellphones, car chargers, and phone chargers. Such as compatible with MacBook Pro/Air 2023/2022, Thunderbolt 4/3 Devices,Apple MagSafe Watch 9/8/7/SE/Ultra, iPad Pro 2022/2021, Samsung Galaxy S23/S20/S10, and iPhone 17/16/15 Pro. Plug and play
- Please Note: To reach 10Gbps speed, keep the cable under 3.3 ft. For USB A Male to USB C adapters, try flipping the USB C connector. USB C Male to USB A adapters support bidirectional 10Gbps transfer within 3.3 ft
Rank #3
- Sleek 7-in-1 USB-C Hub: Features an HDMI port, two USB-A 3.0 ports, and a USB-C data port, each providing 5Gbps transfer speeds. It also includes a USB-C PD input port for charging up to 100W and dual SD and TF card slots, all in a compact design.
- Flawless 4K@60Hz Video with HDMI: Delivers exceptional clarity and smoothness with its 4K@60Hz HDMI port, making it ideal for high-definition presentations and entertainment. (Note: Only the HDMI port supports video projection; the USB-C port is for data transfer only.)
- Double Up on Efficiency: The two USB-A 3.0 ports and a USB-C port support a fast 5Gbps data rate, significantly boosting your transfer speeds and improving productivity.
- Fast and Reliable 85W Charging: Offers high-capacity, speedy charging for laptops up to 85W, so you spend less time tethered to an outlet and more time being productive.
- What You Get: Anker USB-C Hub (7-in-1), welcome guide, 18-month warranty, and our friendly customer service.
Product prices and availability are accurate as of the date/time indicated and are subject to change. Any price and availability information displayed on Amazon at the time of purchase will apply.
