The right boom arm for live streaming is the one that clears your monitor, reaches the position you need, supports the complete microphone setup, and fits your desk. For a low path beneath a screen, consider the Elgato Wave Mic Arm LP; for extra reach and cable channels, the Elgato Wave Mic Arm; and for a studio-style arm with two desk-mounting options, the RØDE PSA1+. These are manufacturer-supported candidates, not a hands-on ranking.
Which boom arm fits your setup?
| Arm | What the manufacturer specifies | Consider it if… | Check before buying |
|---|---|---|---|
| Elgato Wave Mic Arm LP | Low-profile design; supports up to 2 kg / 4.4 lb; about 160 mm / 6.3 inches above the desk at its highest point; includes a 1/4-inch thread and 3/8-inch and 5/8-inch adapters. Elgato lists examples including Wave DX, Shure SM7B, Blue Yeti, HyperX QuadCast, and RØDE PodMic. Elgato product details. | Your monitor is low or you want the arm to sit below the screen’s sightline. | Measure your monitor clearance and arm path. Count the microphone, shock mount, and attached accessories toward the supported weight. Confirm the exact mic and mount thread. |
| Elgato Wave Mic Arm | Elgato describes extra reach, full adjustability, integrated cable channels, and standard microphone mount compatibility. Elgato product details. | You need a conventional raised arm with more reach and built-in cable routing. | Confirm the current model’s load capacity, reach, desk attachment, and thread against your specific setup; those figures are not established here. |
| RØDE PSA1+ | Marketed for podcasters, streamers, and broadcasters; includes a padded desk clamp and threaded desk mount. RØDE product details. | You want a studio-style arm and a choice of clamp or threaded desk mounting. | Verify the current load range, desk thickness, thread or adapter, and monitor clearance for your setup. |
There is no like-for-like independent test here of these models’ movement noise, joint feel, long-term sag, durability, or value. Treat the shortlist as a way to compare geometry and stated features, not proof that one arm performs best for every streamer.
Measure the space and load before choosing
Check the arm’s path, not just its height
Measure from the desktop to the bottom of your monitor, then consider the full route the arm must take from its clamp to the microphone position. Elgato lists the Wave Mic Arm LP at about 160 mm (6.3 inches) above the desk at its highest point. Compare that measurement with your actual monitor gap; it does not, by itself, establish that the arm will fit every desk-and-monitor arrangement.
Also check where the microphone will sit when you are speaking. An arm that clears the monitor at rest may still cross the screen, camera view, or your face when moved into position. Decide whether you need a low horizontal route or a raised, articulated one with extra reach.
What’s actually slowing this PC down?
Pick the symptom - the matching free tool is one click away.
#1 Best Overall
- Free Position Mic Arm: This professional microphone stand is fully adjustable in all parts with 360° base rotation for 135° back and forth extension, 180° arm shaft for up-and-down movement, and 270° metal adapter to freely position microphones. It can be easily folded and pushed away for space-saving storage when it stands idle and pull it back for usage.
- Prolonged Lifetime: Unlike other microphone stands that have a knob on the arm shaft getting in the way and causing spring deformation. InnoGear upgraded mic stand has this problem perfectly resolved with a unique design to prolong the life span of the springs and the stand itself.
- Solid & Heavy-duty: High-quality steel material with super-strong springs and extra positioning hole ensures an excellent load-bearing capacity of 3.3lb/1.5kg, compared to others of 2.2lb/1.0kg. InnoGear boom stand provides effortless and silent microphone positioning, which is vital in live recording situations.
- Desk Edge Compatibility: The desk clamp is specifically designed to securely grip squared edges up to 2 inches in thickness; please ensure your desk edge is flat and not slanted or curved for optimal functionality.
- Microphone Compatibility: This microphone arm stand allows diversity and compatibility, for it comes with a standard microphone clip to fit for dynamic microphones like Shure SM58, Samson Q2U, Shure PGA48 and more, and a 5/8" to 3/8" adapter for HyperX SoloCast 2, HyperX QuadCast 2 S, Razer Seiren V3 Mini, HyperX QuadCast 2, Blue Yeti, Blue Snowball, Blue Snowball iCE, Hyper X QuadCast, SoloCast, Shure SM7B, MV7, Fifine AmpliGame, Fifine K669B (Shock mount not included), Fifine AM8, etc.
Weigh the complete mounted setup
Use the combined weight of the microphone, shock mount, adapter, and any other attached hardware—not the microphone’s weight alone. The LP’s listed capacity is up to 2 kg / 4.4 lb. For the other arms, confirm the current manufacturer specification instead of assuming their capacity from appearance or from another model in the same product line.
Compatibility can depend on the exact microphone and mounting hardware. Elgato’s LP page lists several examples and includes 3/8-inch and 5/8-inch adapters, but verify the thread on your particular microphone or shock mount before ordering.
Rank #2
- [Sturdy Metal] The all metal microphone arm stand provides stability and sturdy protection for your podcast microphone whether you're gaming, podcasting, recording or streaming. The C-clamp can stay attached to a flat desktop and will not slip, making it less likely to scratch your desktop. Even if you vigorously collide with the arm stand or extend it fully to a certain height, the boom arm won't wobble and still remain stable and sturdy. (The microphone is not included)
- [Low Profile] The arm stand for gaming can extend from the bottom of your computer screen. The podcast mic stand gives more space in a unobstructing view while in an intense game. The low profile arm stand for mic can be set to extend under the bottom of the screen without interfering the screen or desktop space, which will not obstruct monitor view even fully extended.
- [Cable Management] The low profile microphone boom stand is equipped with cable managements in hiddenness to organize your microphone cables. Neat arrangement of cable will not cause excessive pulling or resulting in unexpected use, keeping your streaming setup cleaner.
- [Fully Adjustment] Suspension arm stand recording can be extended to 29 inches, suitable for your long large office desktop. The boom arm for microphone can be adjusted up to down by 220 degrees, and horizontally by 360 degrees. More angle adjustments provide more usage options. Tips：The section which near the C-clamp can not be adjusted up to down.
- [Screw Adapter] Coming with three kinds of threads size, 1/4'', 3/8'', 5/8'' that are compatible with most brands of microphones, the microphone boom arm solves the hassle of choosing additional adapters, which give a straightforward but not difficult assembly. You can easily figure out and quickly install and use microphones, shock mounts, etc with the mic stand in gaming, vocal recording, video creation.
Confirm how the arm attaches to your desk
Check desk thickness, the shape and free space around its edge, and whether a clamp can sit securely without obstructing drawers or other equipment. RØDE says the PSA1+ includes both a padded desk clamp and a threaded desk mount. A threaded mount may require a suitable opening in the desk; check the current product instructions and your desk before choosing that method.
What to check for a Shure microphone
“Shure” alone is not enough to establish compatibility: the exact microphone, shock mount, thread, and total weight matter. Elgato lists the Shure SM7B among LP compatibility examples, but confirm the current combination of mic, mount, adapters, and arm before purchasing. If you use a different Shure model, check its mounting requirements rather than assuming the SM7B example applies.
Rank #3
- Cable Management Channels: The upgraded mic arms are optimized with built-in channels as cable management for you to put your cables in by simply removing the rubber cable covers, bringing a clean and neat look without getting your setups and cables tangled while recording or live streaming. The thoughtful design frees the whole look of being a mess and provides a shelter for cables.
- Adjustable Angle & Smooth Movement: The boom arm is fully adjustable in 135° back and forth, and 180° up and down, easy to adjust in multiple directions silently. The base is 360° rotatable. This flexible arm stand allows you to determine which angle is the best for your recording needs.
- Upgraded Length & Height: The length of the arm is increased to 14 inches and the package comes with a 6.3 inches extension riser for extra height. This mic stand has a max reach of 32.3 inches horizontally and 37.4 inches vertically to extend over most monitors. The desk clamp can clip to any desk up to 2 inches thick.
- Built-in Springs & Strong Stability: Made of high-grade thickened steel, this sturdy microphone stand features strong internal springs for reaching a max load-bearing capacity of 3.5 pounds. It can easily handle the weight of heavy microphones like Yeti and SM7B, staying where you put it.
- Universal Compatibility: The 5/8" metal connector is compatible with different kinds of microphones like Blue Yeti, Hyper X QuadCast, SoloCast, Blue Snowball, Shure SM7B, Shure MV7, AT2020, AT2020USB+, AT2035, ATR2500-USB, ATR2100-USB, Fifine K669B (Shock mount not included), Fifine AM8, etc. Perfect for studio, recording, podcasting, streaming, stage.
Elgato’s Wave:3 mounting guidance says a RØDE PSA1 may need additional weight to hold the desired height with that specific microphone setup. That is a useful reminder to check a particular pairing; it does not establish a verdict about the PSA1+ or every Shure microphone. Read Elgato’s Wave:3 mounting guidance.
Buying checklist
- Measure the desk-to-monitor gap and map the arm’s full movement path.
- Check whether the mic will obstruct your screen, camera framing, or speaking position.
- Weigh the microphone, shock mount, adapter, and attached accessories together.
- Identify the exact mounting thread and the adapters included with the arm.
- Check desk thickness, edge shape, clamp clearance, and whether a threaded mount is practical.
- Confirm the current specifications for the exact arm revision and microphone combination.
What this comparison can—and cannot—establish
The listed figures and features come from manufacturer product information, including Elgato’s LP capacity and height specifications available on its product page. They do not establish current prices, stock, or country-specific availability, nor do they settle which arm is quietest or lasts longest. Check each manufacturer’s live page for current model details before buying. For broader stand-selection context, see MusicRadar’s mic stand guide.
Rank #4
- EXTREME STABILITY:The low profile design of this microphone arm allows for a lower centre of gravity of the mic arm, which dramatically improves stability. It ensures that the microphone position is fixed and unchanged, without shaking or shifting, even during intense handling, providing you with clear, noise-free recordings. Perfect for gaming, podcasting, recording and streaming.
- Flexible Height Adjustment:both arms can rotate 360°. The arm with the microphone attached can also swing up and down 180°. No matter where your microphone base clips on, you can adjust the microphone to the position you want. Fits all tables less than 7cm thick.
- REDUCED VISUAL DISTURBANCE:The low profile shape won't stand out in your work or play area, and the stand arm extends across the bottom of your computer screen. The bottom of the arm also hides and secures your microphone cable. Reduces line-of-sight distractions, allowing you to focus more on your work or entertainment content.
- COMPATIBLE:This mic stand desk comes with a 3/8‘’ to 1/4‘’ adapter and 3/8‘’ to 5/8‘’ adapter.Maximum load capacity is up to 2KG, compatible with most of the microphones or microphone shock mounts on the market. Compatible with most of the microphone or microphone shockmounts on the market. Convenient to carry and store when you go out to participate in activities.
- QUALITY ASSURANCE:This low profile mic arm is made of high-quality steel forging, sturdy and durable, and not easy to be deformed or damaged even after long-term use. This product provides one year after-sales service, please feel free to contact us if you have any questions. (Microphone is not included in the package）
Or let it run in the cloud
A boom arm only positions a microphone; if your goal is to keep a YouTube channel live with uploaded videos, StreamNeo is a separate cloud service from StreamNeo. Upload a recording or build a playlist, add your YouTube stream key, and go live. The cloud loops the uploaded videos, so your computer and home connection do not have to stay on. It streams to YouTube only, not from a live camera.
Quick Recap
Best Value
- 【Boom Arm】 - Suspension boom arm stand fit your Blue Yeti, HyperX QuadCast suitable, you can adjust the mic to the suitable angle or height to show your voice.Before installing your hyperx microphone to the microphone arm, you can loosen the knob and adjust it to the angle you want to tighten after installing your gaming mic.
- 【Stability】 - Mic boom arm is dual suspension springs on each boom arm, the knobs are reinforced to keep the mic arm where you want it to be,protects the HyperX QuadCast S microphone from shaking, sinking and making noise.
- 【Mic stand】 - Before you receive this mic stand for hyperx quadcast, we pre-install the silver adapter for hyperx quadcast boom arm. Mic arm adapter can be converted from 3/8"to 5/8"for adapting HyperX QuadCast.
- 【Table Clamp Base】 - Suspension boom arm comes with one desk clamp, can clip to any desktop up to 1.89"/4.8cm thick. The sponge on the mic stand desk base could protect your desk without any scratches when you swivel side screw.
- 【Package】 - Included: 1x HyperX QuadCast Mic Scissor Arm Stand, 1x Table mounting clamp, 1x Screw adapter (3/8" to 5/8" match most microphones and shock mount，Pre-installation completed). Note: Not Included Streaming Mic.
- One flat price per slot for any uploaded quality up to 4K 60fps, with no re-encode or quality tiers.
- Automatic recovery if YouTube drops the stream.
- The first day is free with no card, one free day per account.
- Monthly: $9.99 per month.
Start your free StreamNeo day.
Product prices and availability are accurate as of the date/time indicated and are subject to change. Any price and availability information displayed on Amazon at the time of purchase will apply.
Recommended Free Tools
