Outdated Drivers Are Slowing You Down
One free scan finds every outdated or missing driver and matches the right update for your exact hardware.Free scan · exact hardware matchWindows Errors? Fix Them Before They Spread
Repair common Windows errors and clear accumulated junk for a smoother, more stable PC - no reinstall needed.Free scan · no reinstallThe right control depends on what “cloud-hosted” means. If you started the broadcast in the YouTube mobile app, tap Finish to end it. If a remote encoder or cloud service is sending video to YouTube, use that encoder’s supported mobile controls; YouTube does not provide a universal phone control for an unnamed third-party service. Restarting may also create a new broadcast rather than resume the same one.
First identify where the stream is running
“Cloud-hosted” can describe different setups, and they do not share one stop button. YouTube distinguishes streams created in its mobile app from encoder-based streams, where software or hardware sends video using the channel’s stream key.
- YouTube mobile stream: Your phone is the source, and the stream is controlled in the YouTube app.
- Encoder stream: An encoder sends the video feed to YouTube. The control may be in Live Control Room, the encoder, or both.
- Third-party cloud encoder: A provider runs the encoder remotely. Its dashboard or app—not a general YouTube phone control—determines whether you can stop and restart it from a phone.
Stop a stream started in the YouTube mobile app
- Open the active stream in the YouTube app on the phone that is streaming.
- Tap Finish to end it. YouTube’s mobile instructions describe this as the end-stream control: YouTube Help: Create a live stream on mobile.
This workflow applies to a stream created from the mobile app. It does not explain how to control an encoder running on a separate cloud service.
Stop an encoder-based stream without a PC
For an encoder stream, YouTube’s control guidance separates the broadcast from the incoming video feed. YouTube says that when auto-start and auto-stop are enabled, “you can start or stop streaming from your encoder.” Its encoder guide also describes ending the stream in Live Control Room and stopping the content feed from the encoder.
#1 Best Overall
- Includes Raspberry Pi 5 with 2.4Ghz 64-bit quad-core CPU (8GB RAM)
- Includes 128GB Micro SD Card pre-loaded with 64-bit Raspberry Pi OS, USB MicroSD Card Reader
- CanaKit Turbine Black Case for the Raspberry Pi 5
- CanaKit Low Noise Bearing System Fan
- Mega Heat Sink - Black Anodized
- Check the encoder settings. In YouTube Studio, open the stream’s settings and check whether auto-start and auto-stop are enabled. YouTube documents these as encoder controls; availability and exact controls can depend on the stream setup. See Manage live stream settings.
- Use the available control point. If the encoder is hosted by a third-party provider, sign in to that provider’s mobile app or browser dashboard and use its stop control, if offered. For an encoder you can operate through YouTube’s Live Control Room, follow its end-stream control and stop the encoder’s video feed. The YouTube-produced Live encoder settings guide covers the encoder workflow.
- Confirm the feed has stopped. Check the encoder or provider dashboard and YouTube’s Live Control Room for the stream’s state. Do not assume that closing the dashboard or browser stops the remote encoder; the service may continue running independently.
If the provider has no mobile controls, YouTube’s general encoder instructions cannot operate that remote encoder for you. Check the provider’s own documentation or support for its mobile workflow.
Restart it from a phone
To restart an encoder hosted remotely, use the provider’s supported mobile controls to start the encoder or its YouTube output again. If the provider does not expose those controls on mobile, there is no universal YouTube action that can restart it: the next step depends on the service running the encoder.
Rank #2
- Includes Raspberry Pi 5 16GB with 2.4Ghz 64-bit quad-core CPU (16GB RAM)
- Includes 128GB Micro SD Card pre-loaded with 64-bit Raspberry Pi OS, USB MicroSD Card Reader
- CanaKit Turbine Black Case for the Raspberry Pi 5
- CanaKit Low Noise Bearing System Fan
- Mega Heat Sink - Black Anodized
For a stream managed through YouTube and an encoder, check Live Control Room and the encoder before starting again. YouTube’s API documentation says a broadcast automatically ends around a minute after its bound live stream stops sending video. That lifecycle description does not guarantee a restart window or that reconnecting will preserve the same broadcast. See YouTube Live Streaming API: liveBroadcasts.
Independent reader supportYour contribution helps us test, update, and keep practical guides available for everyone.Or let it run in the cloud
If your goal is an always-on YouTube channel playing uploaded recordings, StreamNeo runs that playback from the cloud rather than from a PC at home. Upload a recording or build a playlist, add your YouTube stream key once, then go live. It plays uploaded videos; it is not a camera-streaming service.
Rank #3
- CanaKit Raspberry Pi 5 Essentials Starter Kit
- Nothing has to stay on at home; StreamNeo runs the stream in the cloud.
- Videos stream as uploaded, up to 4K 60fps, at one flat price per slot rather than quality-based tiers.
- It automatically recovers if YouTube drops the stream.
- The first day is free with no card, with one free day per account.
Monthly: $9.99 per month. Start with the free StreamNeo day.
Quick Recap
Best Value
- 【What you Get】You will get 1*Pi 5 8GB Single Board,1*RasTech Case,1*Active Cooler,1*Screwdriver,1*Installation instructions,12-month free warranty, lifetime service, 24-hour prompt and friendly response.
- 【More Connectors】There are two USB 3.0 ports(5Gbps simultaneously) and two USB 2.0 ports, which triple total bandwidth ,support any combination of up to two cameras or displays. Peak SD card performance is doubled through support for the SDR104 high-speed mode. It provides a smooth desktop experience for you. Offer Gigabit Ethernet and a PCIe interface, along with dual-band Wi-Fi and Bluetooth 5.0/BLE wireless capability. The RasTech Pi 5 Kit use the new 27W 5.1V 5A USB-C power connector.
- 【 Support Dual 4Kp60 Display 】Each of the two microHDMI sockets can control a 4K display at 60 Hertz, now support HDR, offering super HD video for media streaming projects. RPi 5 is the first RPi model that comes with a PCI Express port (PCIe 2.0 x1 with 500 MB/s) to attach SSDs (requires separate M.2 HAT).
- 【 Excellent Chips And Applications】Pi 5 is a full-size Pi computer using silicon built in-house at Pi. The RP1 “southbridge” provides the bulk of the I/O capabilities for Pi 5. Pi 5 is more friendly and convenient in the development of Internet of Things, Web development, machine identification, automatic control and other electronic equipment applications and network.
- 【 Faster CPU, Better GPU 】 Pi 5 features a Broadcom BCM2712 64-bit quad-core Arm Cortex-A76 processor running at 2.4GHz, it delivers a 2–3× increase in CPU performance relative to RaspberryPi 4. The 800MHz VideoCore VII GPU is compatible to OpenGL ES 3.1 and Vulkan 1.2, substantial uplift in graphics performance. Pi 5 Offers lightning-fast CPU speed, a PCI Express interface, a Real Time Clock (RTC) and a power button and runs significantly cooler than Pi 4.
Rank #4
- All-in-One Complete Kit: This SANOOV RPi 5 bundle comes with Raspberry Pi 5 4GB RAM single board, active cooler, durable ABS case and screwdriver. No extra parts needed, ready to use right out of the box for beginners and hobbyists
- Powerful Single Board Computer: Equipped with 4GB RAM and high-performance processor, delivers fast running speed for 4K playback, AI projects, programming and daily computing tasks. SANOOV for raspberry pi 5 4GB is equipped with broadcom 64 quad-core Arm Cortex A76 processor with gigabit ethernet and upgraded with IEEE 802.11ac Wi-Fi, Bluetooth 5.0 dual-band 2.4Ghz and 5Ghz and Power Over Ethernet (POE). Upgrading delivers 2-3 x speed vs Pi 4, redefining the experience
- Efficient Active Cooler: Effectively lowers operating temperature and prevents performance throttling. Runs quietly even under long-time heavy load, ensures stable operation all day long. SANOOV RPi 5 4GB kit offer an active cooler, which combines an aluminium heatsink with a high-performance PWM fan. Active cooler is fully compatible with the Pi OS, which can effectively reduce the temperature of RPi5 and ensure its good performance during long-term high load operation
- Sturdy ABS Protective Case: Well-fitted for Raspberry Pi 5 board, can be secured with 4 screws to effectively protect the Pi 5 motherboard from damage, reserves full access to all ports and buttons. SANOOV uses ABS material to produce the case, which has a softer texture and feel. Meanwhile, SANOOV case adopts a layered design for easy disassembly and installation. (Tip: The Case cannot install M.2 HAT Add on Board and Solid State Drive!)
- Wide Application & Full Compatibility: Seamlessly compatible with official OS and mainstream peripheral accessories for Raspberry Pi 5. Whether you are a beginner, student, electronics hobbyist or professional developer, this all-in-one kit meets your diverse needs. It excels in IoT projects, robotics design, retro gaming devices, home media servers and other DIY creations. Backed by a large global community, you can easily find guides, technical support and shared projects online
Product prices and availability are accurate as of the date/time indicated and are subject to change. Any price and availability information displayed on Amazon at the time of purchase will apply.
